After School Special
#1
Junior Member
Thread Starter
Join Date: Dec 2008
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
After School Special
Started out as a stocker jeep. Raised it to a 4.5 inch lift with custom side pipe exhaust.(custom means done in the front yard). Just recently raised it another 2 inches. Rolling on 31's waiting for the right price for 33's or 35's.
Check out my video on youtube.
Check out my video on youtube.
Last edited by newageoutlaw; 12-18-2008 at 10:50 PM.
#2
CF Veteran
Join Date: Jul 2008
Location: Minnesota
Posts: 2,328
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
nice man..what did you use for the side pipes? i ran no muffler and just some flex pipe off the cat out the side for awhile but sacrificed some ground clearance and a jack point so i dont have that anymore..but it looked cool and sounded cool too..
#5
Junior Member
Thread Starter
Join Date: Dec 2008
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
i used a 90 degree elbow and then an old tip off of a mustang. i took it off because i lost ground clearance, it bogged down in the walls of mud holes and i burnt three peoples legs cause it came out right under the back door.
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Dec 2008
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
sorry I haven't posted in awhile. As of lately I have trimmed the fenders, made the doors removable, and put on 35" bfg all terrains. This summer I am planning on 1 tons and custom 4 links.
Last edited by newageoutlaw; 04-15-2010 at 02:17 AM.
#12
Seasoned Member
Join Date: Mar 2010
Location: Harker Heights, Texas
Posts: 470
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2002
Model: Grand Cherokee (WJ)
Engine: 4.7L
#13
Junior Member
Thread Starter
Join Date: Dec 2008
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Yes I sold it... I just didn't have the money to keep up with the tires and all the broken parts. I also wanted to do so much more with it but once again I just didn't have the money to take it to its full potential so I sold it to someone who could....
and as for the doors it was real easy and I found a right up on how to do it on this forum some where.
and as for the doors it was real easy and I found a right up on how to do it on this forum some where.
Thread
Thread Starter
Forum
Replies
Last Post
mattsmako
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-01-2015 10:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)