project "custom"
#1
Junior Member
Thread Starter
Join Date: Apr 2010
Location: Palm city
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89
Model: Cherokee
Engine: 4.0 AMC
project "custom"
hello all here is my jeep with 11.5 inchs of lift in the front and 9 in the rear for now all that i bought for is nuts and bolts and 6.5 inch rc springs everything was either already on it or i built with metal i had around
#5
Junior Member
Thread Starter
Join Date: Apr 2010
Location: Palm city
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89
Model: Cherokee
Engine: 4.0 AMC
its narrow in the front cause i dont have any offset rims for the front yet and its so high so that it can easily clear 35in tires its has 2 in when i got it then i built 3 in drops for the front and still didnt clear the tires so i just got the 6.5 in springs cause they were only a couple of bucks different then the 4in
#7
CF Veteran
Join Date: Jul 2009
Location: West Deptford, NJ
Posts: 1,839
Likes: 0
Received 7 Likes
on
7 Posts
Year: 97
Model: Cherokee
Engine: 4.0
its narrow in the front cause i dont have any offset rims for the front yet and its so high so that it can easily clear 35in tires its has 2 in when i got it then i built 3 in drops for the front and still didnt clear the tires so i just got the 6.5 in springs cause they were only a couple of bucks different then the 4in
not trying to bust *****. just trying to warn you but you should just trim the fenders. that thing is gonna be so ridiculously unstable at that height. im at 7.5" trimmed with 35s and they clear perfect. i could also be a lot lower.
Last edited by RoyalXJ; 05-27-2010 at 07:12 PM.
Trending Topics
#9
Junior Member
Thread Starter
Join Date: Apr 2010
Location: Palm city
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89
Model: Cherokee
Engine: 4.0 AMC
i have no idea on the camber its strickly mud only now never to drive on the road again but when i drove it down my street it pulls a little not to bad
#10
Junior Member
Thread Starter
Join Date: Apr 2010
Location: Palm city
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89
Model: Cherokee
Engine: 4.0 AMC
the only reason why i went so high is for the water the ground in fl isnt to bad with the hills and stuff but once i get the offsets for the front that will def help
#12
Junior Member
Thread Starter
Join Date: Apr 2010
Location: Palm city
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89
Model: Cherokee
Engine: 4.0 AMC
yeah its done now i will post up some newer pics next week its going out to muddigras this weekend and i will get some pics of it going and i am def going to do a snorkle i just ran outta of time i am leaving tommorrow to take up there but there is def more work to do i am going to run rear track bars to help support the rear end when its trying to turn the bigger tires
#13
Senior Member
Join Date: Sep 2008
Location: MD
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
What type of axles you got under there? Hate for you to try to have fun and break one cause it wasn't strong enough for the tires. I take it that it'll be a home brew snorkle to save 400+ buck. Love to see some actions shots to see why it needs to be so high
#15
Junior Member
Join Date: Dec 2009
Location: Oklahoma City, Ok
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 1993 4.0 not stock