Project black sky
Thread Starter
Honorary Moderator
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
so it was a good easter, lots of food and a good photo shoot:
maybe one day I will be on the otherside of the camera (i am not pictured lol)











maybe one day I will be on the otherside of the camera (i am not pictured lol)











CF Veteran
Joined: Apr 2011
Posts: 1,173
Likes: 3
From: Maine
Year: 1999
Model: Cherokee
Engine: 4.0 inline 6
Great rocks down there and I have grabbers on mine(need pics) and they are a great affordable all terrain I recommend them to every1 who uses their jeep as a commuter to school or work or watever.
Thread Starter
Honorary Moderator
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
well I am out for a while.... LCA on the passenger side at the unibody is ripped.
3/4" "up" and 1-1/4" inboard....
plus I just called around and to see what the cost of welding would be.
Cheapest I got was $75 per half hour, and a half hour minimum charge.
most shops were $80-$115 per half hour for any welding...
I can probably buy steel cheaper than that...
Since I cant afford long arms either I am parked now....
this **** sucks lol




3/4" "up" and 1-1/4" inboard....
plus I just called around and to see what the cost of welding would be.
Cheapest I got was $75 per half hour, and a half hour minimum charge.
most shops were $80-$115 per half hour for any welding...
I can probably buy steel cheaper than that...
Since I cant afford long arms either I am parked now....
this **** sucks lol




Member
Joined: Apr 2011
Posts: 211
Likes: 0
From: Glo Pt,VA/Stewartstown,PA
Year: 2000
Model: Cherokee
Engine: 4.0L I6
well I am out for a while.... LCA on the passenger side at the unibody is ripped.
3/4" "up" and 1-1/4" inboard....
plus I just called around and to see what the cost of welding would be.
Cheapest I got was $75 per half hour, and a half hour minimum charge.
most shops were $80-$115 per half hour for any welding...
I can probably buy steel cheaper than that...
Since I cant afford long arms either I am parked now....
this **** sucks lol
3/4" "up" and 1-1/4" inboard....
plus I just called around and to see what the cost of welding would be.
Cheapest I got was $75 per half hour, and a half hour minimum charge.
most shops were $80-$115 per half hour for any welding...
I can probably buy steel cheaper than that...
Since I cant afford long arms either I am parked now....
this **** sucks lol
Thread Starter
Honorary Moderator
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
I got new ones free of charge so it was all good
I dont know, the jeep gets abused, lots of rocks then travels washboards at high speeds to and from the trails. not surprised. just really sucks
I dont know, the jeep gets abused, lots of rocks then travels washboards at high speeds to and from the trails. not surprised. just really sucks
Thread Starter
Honorary Moderator
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
Thread Starter
Honorary Moderator
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
I think I know where you are talking about. I have done alot of wheeling around the west ad north valley when I lived in the east valley
I do alot in the Dona Ana mainly or A mountain
There's a good trail that's right below where those pictures were taken that leads to some good singletrack. I like the Dona Ana's too, I helped make some of those trails a few years ago.
Thread Starter
Honorary Moderator
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
Thread Starter
Honorary Moderator
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
Long Arms will be purchased in 2 weeks (if not sooner)
Then 35/12.5r15 KM2's will be purchased since I need new tires
Then 35/12.5r15 KM2's will be purchased since I need new tires





