Project Black Betty ....Tons of Pics
#16
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: Birmingham Alabama
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: Renix
Project Black Betty In with the New
Dana 44 and steel 15x8 the rims were used I justcleaned them up and hit the with some Rustolium metallic Black Click Click
#19
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: Birmingham Alabama
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: Renix
Re dana 44
I had to remove the carrier to take the ring gear off to put the mini spool in this is common on dana 44 cause the ring gear is to big to slide the pin out with the ring gear attached to the carrier.......The carrier is a pain to get out just take your time and pry carefully.....also mark the bearing caps so you dont switch sides with them or even turn them over on the correct side this would be very bad for your rear end.......you can see how my is marked with a J on the cap and the diff housing.......the other side the J is horizontal not vertical so as not to confuse the sides .....see green arrows below
#20
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: Birmingham Alabama
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: Renix
re dana 44
Also be sure to use lock tight on the ring gear and torque to 60 Foot pounds and torque the caps to 80 foot pounds
#21
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: Birmingham Alabama
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: Renix
Tires
Got the Tires mounted today they are 32x11.50-15 Sport Kings there not the best but they will due for now and they were cheap
#24
Keep up the hard work and you will have a beast to go wheeling with. Once Leo3000 gets all his upgrades done and I get all my repairs done we can take them out to Stoney Lonesome OHV in Cullman and beat on them a little.
#25
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: Birmingham Alabama
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: Renix
Black Betty
Sounds Good.......I have family in cullman too so we could hit up the lake house or camp somewhere.......take it easy
#26
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: Birmingham Alabama
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: Renix
Project BLACK BETTY adjustable track bar
Adjustable track bar came in today $58 shipped to my door
#27
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: Birmingham Alabama
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: Renix
Black Betty lower contol arms
Rubicon Express Lower Control Arms came in today thanks djritter1122
#29
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: Birmingham Alabama
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: Renix
re thanks
hahahaha....I told you thanks in person But thanks again did you check the pics of the mini spool install?.......I will let you know how it dose on and off road when I get her all put back together....When it comes time to remove your carrier From your Dana 44 hit me up I have a few tricks that made it easier....they are really in there good and you will cus a lot trying to get it free.....any way take it easy
#30
MJ>XJ
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
lol... im gonna do it... just waiting till i get this WJ done and running so i can move it out the shop and my XJ in to get some axle and interior make overs... but WJ motor suck to pull out... i cant get the front fan off to get the radiator and everything out... sucks...