My XJ Build
Thread Starter
Junior Member
Joined: Dec 2018
Posts: 37
Likes: 0
From: Kitimat B.C
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0L
Have you tried moving the pinions at all? Looks like at least the one DS is off, try spinning around a bit while pulling on it. Some need more man handling than others to get them to shift ESPECIALLY if they have been stationary for a while and you've been working on them with ebrakes on etc. This is why I like the direct mechanical connection of the other replacement options but you shouldn't have an issue cranking on the Novak either.
Thread Starter
Junior Member
Joined: Dec 2018
Posts: 37
Likes: 0
From: Kitimat B.C
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0L
Installing drivers mount, this is a pretty terrible job lining steering box up. Also use heat on these they snap easy....
Pass side is more easy, a few holes to drill and everything lines up decent.
Thread
Thread Starter
Forum
Replies
Last Post
Jeepxj1234
Jeep Builds
117
Dec 31, 2014 03:03 PM
TMNT2210
Fabrication & builders section.
40
Apr 24, 2012 04:50 PM
TheycallmeSDZ
Jeep Builds
5
Dec 13, 2011 12:17 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
