Can someone go through this and tell me if I have what I’m gonna need or if there’s anything not needed? I’m going with a 6.5 long arm on 35s. Recommendations welcomeddd.





Suspension : https://www.rustysoffroad.com/jeep-s...ravel-kit.html



Slip yoke eliminator : https://www.rustysoffroad.com/jeep-d...liminator.html (not for sure if it fits)



Front bump stops : https://www.ironrockoffroad.com/prod...bumpstops.html



Rear bump stops : https://www.ironrockoffroad.com/prod...-bumpstop.html



Rear drive shaft heavy duty : https://www.adamsdriveshaftoffroad.c...y-duty-series/



Front drive shaft heavy duty : https://www.adamsdriveshaftoffroad.c...y-duty-series/



Axle shims :



Extended brake lines : https://www.ironrockoffroad.com/prod...e-kit-4-8.html



Adjustable track bar : https://www.rustysoffroad.com/jeep-s...ackage-xj.html



Rear dana : (Dana44)



Gears :



Axles :

Steering :

 

At 6.5"
I'd put 95.9% of my efforts in the steering and track bar.

Over the axle track bar and over the knuckle steering.
Wj steering.

Steering and track bar are critical. Everything else is just bolt on stuff that affects the steering and track.

 

What kind steering and track bar do you recommend? Is everything I listed needed?