First build: 92 XJ (4 doors)
Thread Starter
Senior Member
Joined: Oct 2009
Posts: 873
Likes: 2
From: Quebec, Canada
Year: 1992
Model: Cherokee
Engine: 4.0 High Output
Call and order from these guys http://radioworld.ca/index.php. They are located in Toronto so shipping would be cheap and fast. I got my antenna and cable from them.
Thread Starter
Senior Member
Joined: Oct 2009
Posts: 873
Likes: 2
From: Quebec, Canada
Year: 1992
Model: Cherokee
Engine: 4.0 High Output
Update:
I bought a 5 gallon Gerry can and I tied it on the roof basket. Gerry can is empty. I also painted my stock diff covers red even though I bought some Solid diff covers. (Don't have them yet) I had a car show to go to yesterday and though it would look nicer like that.



The Beast and yours truly @ the car show.
I bought a 5 gallon Gerry can and I tied it on the roof basket. Gerry can is empty. I also painted my stock diff covers red even though I bought some Solid diff covers. (Don't have them yet) I had a car show to go to yesterday and though it would look nicer like that.



The Beast and yours truly @ the car show.
Seasoned Member
Joined: Mar 2011
Posts: 346
Likes: 1
From: Pittsburgh, Pa
Year: 1999
Model: Cherokee
Engine: 242CI 4.0L I6
That is one hell of a jeep and definitely came a long way. I wish it was easier to mod WJs without breaking the bank. Absolutely beautiful Jeep.
Thread Starter
Senior Member
Joined: Oct 2009
Posts: 873
Likes: 2
From: Quebec, Canada
Year: 1992
Model: Cherokee
Engine: 4.0 High Output
Update:
I got the front brakes done yesterday (pads & rotors). Also, I should have my differential covers from Solid by the end of next week. Next is changing every bushings and ball joints up front. Should be done by next week and then I will be able to test out the suspension.
I got the front brakes done yesterday (pads & rotors). Also, I should have my differential covers from Solid by the end of next week. Next is changing every bushings and ball joints up front. Should be done by next week and then I will be able to test out the suspension.
Thread Starter
Senior Member
Joined: Oct 2009
Posts: 873
Likes: 2
From: Quebec, Canada
Year: 1992
Model: Cherokee
Engine: 4.0 High Output
I haven't picked up the covers yet, I will go tomorrow. In other news, I was finally able to get a cable to connect my antenna to my CB.
Here's a picture of the CB. (taken from Google)

I will go drive around tomorrow and will see if I need to tune the antenna.
Here's one taken in my Jeep tonight. (didn't come out perfect)
Here's a picture of the CB. (taken from Google)

I will go drive around tomorrow and will see if I need to tune the antenna.
Here's one taken in my Jeep tonight. (didn't come out perfect)
Thread Starter
Senior Member
Joined: Oct 2009
Posts: 873
Likes: 2
From: Quebec, Canada
Year: 1992
Model: Cherokee
Engine: 4.0 High Output
Got my diifs covers this morning!!! I will install those in 2 weeks or so.

Here's a daytime picture of my CB. It won't stay there too long as I want to move it under the steering wheel instead.

Here's a daytime picture of my CB. It won't stay there too long as I want to move it under the steering wheel instead.
Junior Member
Joined: Aug 2010
Posts: 34
Likes: 0
From: Oakland, CA
Year: 1989
Model: Cherokee
Engine: 4.0L
Thread Starter
Senior Member
Joined: Oct 2009
Posts: 873
Likes: 2
From: Quebec, Canada
Year: 1992
Model: Cherokee
Engine: 4.0 High Output
Alright, not much to say other than I got some work done on the Jeep this week. I still have to change some ball joints (one side) and the trac bar bushings. It should be done by next weekend. If my mechanic has time, I'll tell him to install those diff covers at the same time.
I did some minor stuff to it: changed the driver's side headlight surrounding, the turn signal reflector and installed a used rear wiper arm as everything was cracked/broken since I bought the Jeep. Now, I'll be able to see better when it rains/snows. All I have to do after is some maintenance before the winter. (plugs, wire, cap and injectors)
If I have some money left after, I might check for some new or used 33 inch (or 35?) mud tires. I find my 31's too small since the lift. lol
I did some minor stuff to it: changed the driver's side headlight surrounding, the turn signal reflector and installed a used rear wiper arm as everything was cracked/broken since I bought the Jeep. Now, I'll be able to see better when it rains/snows. All I have to do after is some maintenance before the winter. (plugs, wire, cap and injectors)
If I have some money left after, I might check for some new or used 33 inch (or 35?) mud tires. I find my 31's too small since the lift. lol
Cherokee Forum Vendor
Joined: May 2010
Posts: 1,177
Likes: 1
From: Montreal, Canada
Year: 2000
Model: Cherokee
Engine: V6 4L
Originally Posted by Bimmer_2002
Alright, not much to say other than I got some work done on the Jeep this week. I still have to change some ball joints (one side) and the trac bar bushings. It should be done by next weekend. If my mechanic has time, I'll tell him to install those diff covers at the same time.
I did some minor stuff to it: changed the driver's side headlight surrounding, the turn signal reflector and installed a used rear wiper arm as everything was cracked/broken since I bought the Jeep. Now, I'll be able to see better when it rains/snows. All I have to do after is some maintenance before the winter. (plugs, wire, cap and injectors)
If I have some money left after, I might check for some new or used 33 inch (or 35?) mud tires. I find my 31's too small since the lift. lol
I did some minor stuff to it: changed the driver's side headlight surrounding, the turn signal reflector and installed a used rear wiper arm as everything was cracked/broken since I bought the Jeep. Now, I'll be able to see better when it rains/snows. All I have to do after is some maintenance before the winter. (plugs, wire, cap and injectors)
If I have some money left after, I might check for some new or used 33 inch (or 35?) mud tires. I find my 31's too small since the lift. lol
Thread Starter
Senior Member
Joined: Oct 2009
Posts: 873
Likes: 2
From: Quebec, Canada
Year: 1992
Model: Cherokee
Engine: 4.0 High Output
Thread Starter
Senior Member
Joined: Oct 2009
Posts: 873
Likes: 2
From: Quebec, Canada
Year: 1992
Model: Cherokee
Engine: 4.0 High Output
Alright, so Jeep is finally fixed!!! It drives way better then when I first got it 2 years ago. Everything in the direction is new (ball joints, tie-rods, trac bar bushings etc...) All I have to do now is an alignment. I will schedule that tomorrow. I will have new pictures to post by this weekend. 
P.S.: Covers are not on yet, but should be on in 2 weeks. It going back to my mechanic for some maintenance. (spark plugs, wires etc..)

P.S.: Covers are not on yet, but should be on in 2 weeks. It going back to my mechanic for some maintenance. (spark plugs, wires etc..)
Last edited by Bimmer_2002; Oct 6, 2011 at 07:07 PM.


