I kept burning out those plug and play LED bulbs, not enough room for cooling.
They have a cooling fan mounted on the back/engine side of the bulb
plus there is adequate space behind/around each surround I hope there won't be any issues.
driver side bulb cooling fan
passenger side bulb cooling fan
little less room, but still looks to be enough
I will still keep the old set as an emergency backup
This is the low beam pattern in a not so dark parking lot
They have a cooling fan mounted on the back/engine side of the bulb plus there is adequate space behind/around each surround I hope there won't be any issues. driver side bulb cooling fan passenger side bulb cooling fan little less room, but still looks to be enough I will still keep the old set as an emergency backup This is the low beam pattern in a not so dark parking lot
mine had cooling fans too, but after they run for a while the get hot enough to burn you. One went out, then the next went out 5 days later. Had to pay $10 per replacement so I said screw it and got truck lites. So much better.
They have a cooling fan mounted on the back/engine side of the bulb
plus there is adequate space behind/around each surround I hope there won't be any issues.
driver side bulb cooling fan
passenger side bulb cooling fan
little less room, but still looks to be enough
I will still keep the old set as an emergency backup
This is the low beam pattern in a not so dark parking lot
those are really bright. Like I thought just 55/66 watt bulbs with upgraded harness and housing was a upgrade over stock. youll have to let us know down the road how they are doing. I would be worried that they wouldnt melt off the snow but from what the other guy was saying you shouldnt have a problem with that. Hope they dont burn out like nuts.
Very jealous of your new up-grades, I can't wait to get my taxes done. I told my wife I wanted to go ahead and order some stuff for my trailer but she said to wait till Tuesday. She handles paying the bills for the home. And I handle spending the excess Hah! Hah! I really want a high lift jack too but it is way down on my list of things.
Keep up-dating, good stuff!
This is roughly how I plan on laying them out on my Jeep. The lights will be RTV sealed to the roof to prevent leaks.
The lights will be grounded to the mounting screws. I will be "daisy-chaining" the hot leads together and adding an in-line fuse between the lights and the parking lamp wire on the headlight switch.
UPS man brought me another delivery 5 LED smoked cab/roof lights 5-1/2" long 3" wide 1-1/2" deep This is roughly how I plan on laying them out on my Jeep. The lights will be RTV sealed to the roof to prevent leaks. The lights will be grounded to the mounting screws. I will be "daisy-chaining" the hot leads together and adding an in-line fuse between the lights and the parking lamp wire on the headlight switch.
can't wait to see some pics of these things installed. Makes me want to order some.
This has got to be the most incredible jeep build I have ever seen. Thank you for taking so much time to upload such quality pictures! Gave me wayy to many ideas than my budget SHOULD allow for
