Dave's 2000 XJ Clean & Capable
Thread Starter
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
97 tj. 2.5L AX5 Stick shift, 3" suspension, brand new 33" Baja Claws, LED lights all around, LED rock lights, Smitty bilt fenders, some type of rear fender guards, full doors, half doors, soft top, new paint.
Decent little jeep
Decent little jeep
CF Veteran
Joined: Apr 2011
Posts: 4,825
Likes: 2
From: Indianapolis
Year: '99 and '91
Model: Cherokee
Nice.
That's pretty much what I'd be looking at. I figure I could rock the 2.5l and swap a 4.0 in down the road. I have a spare anyways. All the 5spd/4.0 TJs near me must be made of gold, people want waaaay too much.
that is IF someone bites on a trade, lol.
Got plans for the TJ? Or another XJ?
That's pretty much what I'd be looking at. I figure I could rock the 2.5l and swap a 4.0 in down the road. I have a spare anyways. All the 5spd/4.0 TJs near me must be made of gold, people want waaaay too much.
that is IF someone bites on a trade, lol.
Got plans for the TJ? Or another XJ?
Thread Starter
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
Tj plans are:
4.5 inches, 35s, 456s after I find a pair of 44s, something similar to the Rock KRawler triangulated long arm setup, lockers front and rear, new front bumper, flat belly, maybe a 4:1 case.
who knows.
4.5 inches, 35s, 456s after I find a pair of 44s, something similar to the Rock KRawler triangulated long arm setup, lockers front and rear, new front bumper, flat belly, maybe a 4:1 case.
who knows.
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
So, you traded for a vehicle that costs even more to build. lol
Junior Member
Joined: Nov 2012
Posts: 56
Likes: 0
From: Youngstown OH
Year: 99
Model: Cherokee
Engine: 4.0
I know that's the point of regearing but a 4cyl will still not turn 35s near as good as a 4.0 4:56 gears or not. One good thing tho is that Dave only has to drive a few miles to work so I guess it'll be okay. I was just slightly biased towards his Cherokee because I know all the work that went into it and helped with a good deal of it.
Thread Starter
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
Doesn't bother me.
4.0 swap is always an option not terribly hard.
I could swap a 4.0, ax15, and a new t case on without much...only need different engine mounts on the frame
4.0 swap is always an option not terribly hard.
I could swap a 4.0, ax15, and a new t case on without much...only need different engine mounts on the frame


