Dave's 2000 XJ Clean & Capable
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
I may have over looked this but are you putting the upper link on the drivers side?
If so I highly suggest a Rock Krawler style UCA joint in the axle housing.
If so I highly suggest a Rock Krawler style UCA joint in the axle housing.
Thread Starter
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Jul 2009
Posts: 2,522
Likes: 0
From: New Jersey
Year: 2000
Model: Cherokee
Engine: l6 HO
CF Veteran
Joined: Jul 2009
Posts: 2,522
Likes: 0
From: New Jersey
Year: 2000
Model: Cherokee
Engine: l6 HO
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
I see them used all the time between 1k and 1500.
I'm about to die for a set.
The pull like hell until they don't hold air anymore.
My buddy runs a set and it's crazy.
I'm about to die for a set.
The pull like hell until they don't hold air anymore.
My buddy runs a set and it's crazy.



