1998 Daily Driver Build
Thread Starter
CF Veteran
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
Thread Starter
CF Veteran
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
Alright. Next weekend i got a lot planned
Front axle swap
Painting axle as well
Spartan locker D30
With lube locker gasket
New brakes (rotors and pads)
Install dukie discos (swaybar)
3" front coils
Relocating front speakers. (Rewiring)
Adding rear speakers. (Rewiring)
Front axle swap
Painting axle as well
Spartan locker D30
With lube locker gasket
New brakes (rotors and pads)
Install dukie discos (swaybar)
3" front coils
Relocating front speakers. (Rewiring)
Adding rear speakers. (Rewiring)
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Thread Starter
CF Veteran
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
At some point i probably will. My philosophy right now is with that kind of stuff is stick with stock stuff so i can go to the junkyard for spares.
And i'll be sure to post up how it feels and all.
It's my daily driver so i hope it's not too too bad
And i'll be sure to post up how it feels and all.
It's my daily driver so i hope it's not too too bad
well I had a little fun today.
just a little flexing

and stuffing tires....

and SKID PLATES!

also, my next 2 paychecks are going towards some interesting stuff. funny how plans change. at least for a little while. I want to put them 33s to use!
also, put a nice hole in my muffler, and I have a cracked manifold....
just a little flexing

and stuffing tires....

and SKID PLATES!

also, my next 2 paychecks are going towards some interesting stuff. funny how plans change. at least for a little while. I want to put them 33s to use!
also, put a nice hole in my muffler, and I have a cracked manifold....
How's the paint on your center caps holding up?
Edit: How did it hold up, I should say.
Last edited by ekaybe; Jun 25, 2013 at 04:54 PM.
Thread Starter
CF Veteran
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
Couple things that have been done recently. Relocated speakers into a pre 97 soundbar above the front seats. Added a rear pre 97 soundbar in the rear in the usual spot.
Need to repaint the diff and redo the bedliner with some better stuff. Also going to do the rear quarter in bedliner instead of plastidip as well.
My horns are broke to hell as well. Decided i'd get some hella supertones and i'm going to mount them on the grill. Will be mounting them this week and wiring sometime later when I can. I need horns back. I actually use them a lot.
Also went to Rausch Creek finally and did some wheeling. I will post videos of it later
Also got a free alignment at work. Our driveway alignment was almost dead on. Also finally straightened out the steering wheel (never got around to it)
Need to repaint the diff and redo the bedliner with some better stuff. Also going to do the rear quarter in bedliner instead of plastidip as well.
My horns are broke to hell as well. Decided i'd get some hella supertones and i'm going to mount them on the grill. Will be mounting them this week and wiring sometime later when I can. I need horns back. I actually use them a lot.
Also went to Rausch Creek finally and did some wheeling. I will post videos of it later
Also got a free alignment at work. Our driveway alignment was almost dead on. Also finally straightened out the steering wheel (never got around to it)
Thread Starter
CF Veteran
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
just every now and then while parking, or leaving a parking space, it likes to grab sometimes.
when I first put it in, I had a little toe in and then I put it on the alignment machine at my work, and after that it seemed to grab a little more when it was closer to 0 toe whatsoever.
overall I'm happy with how it turned out. not much trouble on the road at all, and great performance off-road.
Thread Starter
CF Veteran
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
Parts i have and need to install:
Lebaron hood vents
CB radio/Antenna
Durango steering box and steering spacer
Dukie Discos - still haven't gotten around to it
Lebaron hood vents
CB radio/Antenna
Durango steering box and steering spacer
Dukie Discos - still haven't gotten around to it
Last edited by kuzican; Dec 13, 2013 at 11:57 PM.


