1993 2wd to 4wd build thread
#16
Senior Member
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
ok just giving u the heads up. i did the same after i put a new floor in my 96 classic and it drove me up the wall
#17
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: lawrenceville,ga
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
thanx for the heads up gobbs_stopper im going to run it and see how its goes its been fine so far but i've been running the ac i've ran my mustang for years no ac ,long tubes ,and carpet only no mass backing or sound deading in the south and its no where near that hot so as long as it says like it is i think i'll like it i wouldn't have considered but the carpet was terrible
#19
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: lawrenceville,ga
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
#22
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: lawrenceville,ga
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
#23
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: lawrenceville,ga
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
#24
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: lawrenceville,ga
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
over all im pretty happy with the lift it went on pretty smooth no death wooble its stiffer but not to bad i will be buying somethings that i think will make the lift nicer im getting from and rear extended brake lines as i didn't like haveing to bend up the hard lines and i'll be getting some new shocks the ones that i got with the lift will work for now but i will be upgradeing them here soon
#25
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: lawrenceville,ga
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
future mods:
removeing molding and bedlineing the rocker
adding another coat on the front florr board and cargo areas
getting some 32's or 33's
getting a aw4 and np231 to replace the 2wd trany
some bumpers front and rear
home brew roof rack
some sliders
removeing molding and bedlineing the rocker
adding another coat on the front florr board and cargo areas
getting some 32's or 33's
getting a aw4 and np231 to replace the 2wd trany
some bumpers front and rear
home brew roof rack
some sliders
#26
Seasoned Member
Join Date: Apr 2009
Location: gulf shores
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
i pulled the carpet on my 95 and rhino lined it with 2 layers. the noise wasnt bad, i had my doors off a good bit of the time so i didnt care but the heat was horrible, after about 6 months the rhino liner actually started coming off the rear floorboards,but just top layer, its mainly because the lack of heat shields underneath, your muffler and cat are directly under passenger front seat and back floorboard. all the heat can do is rise.ill be keeping my arpet for as long as possible now
#27
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: lawrenceville,ga
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0