Gear Install
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
There's nothing to it.
Granted, getting the carrier bearings off can be a *****. I've broken my share of tools and rigged my share of contraptions to get those off.
I usually resort to cutting them off or buying a new carrier. (When gearing I usually need a different one anyways.)
You DO have the right carrier, don't you?
Granted, getting the carrier bearings off can be a *****. I've broken my share of tools and rigged my share of contraptions to get those off.
I usually resort to cutting them off or buying a new carrier. (When gearing I usually need a different one anyways.)
You DO have the right carrier, don't you?
Boy my pcs slow tonight
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Gotcha.
Here's my carrier bearing puller set-up that I used last time. It's about 3 different puller sets all rigged together. It only slipped off about 20 times before it pulled it. Took lots of heat too.
This is what you have to resort to if you don't have a shop press.
THIS is why I use set-up bearings.
Here's my carrier bearing puller set-up that I used last time. It's about 3 different puller sets all rigged together. It only slipped off about 20 times before it pulled it. Took lots of heat too.
This is what you have to resort to if you don't have a shop press.
THIS is why I use set-up bearings.
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
Nov 7, 2015 01:22 AM
Docruiz
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
Sep 2, 2015 07:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)