Any Georgians?
CF Veteran
Joined: Jun 2011
Posts: 2,720
Likes: 44
From: Gainesville GA
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Senior Member
Joined: Jun 2009
Posts: 601
Likes: 0
From: Mineral Bluff, Ga
Year: 1997
Model: Cherokee
Engine: 4.0L
I got a few more- http://s1008.photobucket.com/user/gr...?sort=3&page=2
Newbie
Joined: Oct 2014
Posts: 14
Likes: 0
From: Lyons, GA
Year: 1997
Model: Cherokee
Engine: 4.0 High Liter Output
Hey guys if anyone has a 1997 xj they're parting out PM me. I need the header panel and front drivers side quarter panel for my 97 xj sport. Thx.
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
I really want to do baotsides and hi rocker panels. The fact I can't close my driver front door is some strong motivation lol.
Someone should buy my cage minus the B pillar X.
Someone should buy my cage minus the B pillar X.
CF Veteran
Joined: Apr 2011
Posts: 3,493
Likes: 0
From: Chickamauga Ga.
Year: 2000
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
PM me. A pillars with kickers on the bottom, dash and windshield spreaders, two tubes from the windshield spreader to the B pillar in the middle, two tubes from the B pillar to the C pillar in the middle, rear hatch spreaders, C pillar tie ins, and a hatch spreader.
I'll cut it out as carefully as possible and it could be welded and slugged back together pretty easily. All 1.5" tube.
I think I saw some on FB. Thing looked pretty tall. I know a guy who wheels a 30/35 with hydro assist and E lockers on 35's hard.
I'll cut it out as carefully as possible and it could be welded and slugged back together pretty easily. All 1.5" tube.
I think I saw some on FB. Thing looked pretty tall. I know a guy who wheels a 30/35 with hydro assist and E lockers on 35's hard.
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
PM me. A pillars with kickers on the bottom, dash and windshield spreaders, two tubes from the windshield spreader to the B pillar in the middle, two tubes from the B pillar to the C pillar in the middle, rear hatch spreaders, C pillar tie ins, and a hatch spreader.
I'll cut it out as carefully as possible and it could be welded and slugged back together pretty easily. All 1.5" tube.
I think I saw some on FB. Thing looked pretty tall. I know a guy who wheels a 30/35 with hydro assist and E lockers on 35's hard.
I'll cut it out as carefully as possible and it could be welded and slugged back together pretty easily. All 1.5" tube.
I think I saw some on FB. Thing looked pretty tall. I know a guy who wheels a 30/35 with hydro assist and E lockers on 35's hard.
Member
Joined: May 2010
Posts: 247
Likes: 0
From: Locust Grove, Ga
Year: 2000
Model: Cherokee
Engine: 4.0
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
The holes on the inner C that are threaded are where the super duty coil sling mounts bolt to... look at mine and you'll see how I attached my ORIs... plenty strong and very easy... Also cheap compared to buying buckets and all for coils... I recommend ORI's or coil overs...
Also it's 35 spline inner and outer shafts... 1/2 in thick tubes... 1.5in thick shafts stock... it's very stout...
If u need a 10.50 to match let me know... I'll see what kinda deal I can work out...
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
Your 2x6 pushed up?? I've wondered if mine would... I have yet to hit them so i dunno... I don't have them tied to the frame yet... my control arms are tied to them and the frame though I guess... need to tie them in at the back...
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Mine are welded to hell and back and I bent them up. I landed on them 3 or 4 good times at gulches and did it. Andy hit his pretty good and they didn't move with only 5 2" welds on them lol.