Well, if your looking for decent front brake pads, we have the cmax ones. Real nice and quiet. Though I busted something with the parking brake recently. Have to add that to the list of littler things. Speaking of which, whose handy with wiring? Sadly I have an electric seat,windows, and locks. All act up. Help would be much appreciated.

 

I'm pretty good but I think a couple of guys on here are electricians

 

Sounds like you have a short in the wiring somewhere. Or the switch is going out. Follow the wires from the switch to the device you are trying to troubleshoot. If the wires are cut/cracked/frayed, then cut it where it's damaged and re-splice together. MAKE SURE to DISCONNECT the battery, or you'll have blown fuses.

 

Hmmm flat tire

 

Sorry if this is a dumb question Jeepola, but what exactly is this?? And where would I purchase bearings and shims?

 

I just joined but I would like a meeting I am on the net of san antonio

 

Horay for a new xj!

 

Yay more Cherokees. Tell us about your self and your cherokee

 

Anybody know were I can get a bunch of dom tubing?

 

Where*

 

When you do the gears in the diffs you're supposed to replace the shims and bearings at the same time. I ordered a master shim kit from 4wheel parts for 90$ each. I had to buy a new carrier also. The carrier for the 3:55's (my stock gear ratio) is too small for the 4:10's. if you have 3:73's you don't need to get a new carrier, it will fit higher numerical gears.

 

The Jeep Nation is having a meet this Friday at Old West Burgers on 1604/military hwy a few of us are going out also. The meet starts up at 5

 

The new carrier is for the Dana 30 front axle.

 

Oh, I still have stock gears at 3:55, but I would love to smooth out the ride in mine haha. I appreciate it tho, thanks. Hopefully I'll get 4:10s eventually..

 

Ill go 4.56 when I move up to 33s in the next year or so. I'm on 31s now with 31"s which aint to bad