San Antonio XJ's
Thread Starter
CF Veteran

Joined: Jan 2011
Posts: 1,653
Likes: 6
From: Converse, Texas
Year: 1999
Model: Cherokee
Engine: 4.0 I6
Also apparently she got it in a divorce, and it's a V8. I'm pretty sure it's legit, I mean come on man, no one would think of the name "Caroline" right? 
Sorry for all the sarcasm, that just pissed me off, shoulda known it was too good to be true from the start.

Sorry for all the sarcasm, that just pissed me off, shoulda known it was too good to be true from the start.
Seasoned Member
Joined: Dec 2013
Posts: 473
Likes: 0
From: SATX
Year: 1999
Model: Cherokee
Engine: 4.0 I6
what else can I give you scammer man? my SSN and mothers maiden name? get bent.
That looks awesome, going to have to get mine running good for the next Open Run.
Took it out on Saturday and its overheating, found a coolant temperature sensor cracked and the radiator fan motor must be seized. Good flex though.
The plus to leaving the windows down is the wildlife also gets to enjoy the jeep, found a fox hanging out in it a few months ago.
Took it out on Saturday and its overheating, found a coolant temperature sensor cracked and the radiator fan motor must be seized. Good flex though.
The plus to leaving the windows down is the wildlife also gets to enjoy the jeep, found a fox hanging out in it a few months ago.
Seasoned Member
Joined: Dec 2013
Posts: 473
Likes: 0
From: SATX
Year: 1999
Model: Cherokee
Engine: 4.0 I6
That looks awesome, going to have to get mine running good for the next Open Run.
Took it out on Saturday and its overheating, found a coolant temperature sensor cracked and the radiator fan motor must be seized. Good flex though.
The plus to leaving the windows down is the wildlife also gets to enjoy the jeep, found a fox hanging out in it a few months ago.
Took it out on Saturday and its overheating, found a coolant temperature sensor cracked and the radiator fan motor must be seized. Good flex though.
The plus to leaving the windows down is the wildlife also gets to enjoy the jeep, found a fox hanging out in it a few months ago.
what does the fox say? jeepjeepjeepjeepjeepjeep..........
Seasoned Member
Joined: Apr 2012
Posts: 272
Likes: 1
From: San Antonio/Houston, Texas
Year: 1988
Model: Cherokee
Engine: 6 cylinder 4.0L
Damn, I wish I coulda made it. I was workn on mine. Installed the new 703 injectors and worked on some other stuff. I had 3 of my old injectors pissn on my exhaust. Worried it was gunna go up in flames. Still lookn out for a new steering gear box. Once I get that replaced I should be ready to roll out again.
Seasoned Member
Joined: May 2011
Posts: 285
Likes: 0
From: san antonio, TX
Year: 1988
Model: Cherokee
Engine: staight 6
Damn, I wish I coulda made it. I was workn on mine. Installed the new 703 injectors and worked on some other stuff. I had 3 of my old injectors pissn on my exhaust. Worried it was gunna go up in flames. Still lookn out for a new steering gear box. Once I get that replaced I should be ready to roll out again.
Seasoned Member
Joined: Apr 2012
Posts: 272
Likes: 1
From: San Antonio/Houston, Texas
Year: 1988
Model: Cherokee
Engine: 6 cylinder 4.0L
I'll try and make it to that one. I really hope I have my steering fixed by then.
Seasoned Member
Joined: May 2011
Posts: 285
Likes: 0
From: san antonio, TX
Year: 1988
Model: Cherokee
Engine: staight 6
CF Veteran
Joined: Jul 2012
Posts: 4,104
Likes: 2
From: San Antonio, TX
Year: 1996
Model: Cherokee
Engine: 4.0L
hopefully ill have my front end figured out by theni think im just going to swap the knuckles over from my old d30 along with the steering(zj tierod) and change the u-joints and wheel bearing since i already have those parts. then stretch the arms about an inch forward and adjust the caster a bit and hopefull ill be good to go
every thing looked fine when i had it out before the swap too :/
Seasoned Member
Joined: May 2011
Posts: 285
Likes: 0
From: san antonio, TX
Year: 1988
Model: Cherokee
Engine: staight 6
i definatly want to make this even. its my birthday weekend.
hopefully ill have my front end figured out by then i think im just going to swap the knuckles over from my old d30 along with the steering(zj tierod) and change the u-joints and wheel bearing since i already have those parts. then stretch the arms about an inch forward and adjust the caster a bit and hopefull ill be good to go every thing looked fine when i had it out before the swap too :/
hopefully ill have my front end figured out by then i think im just going to swap the knuckles over from my old d30 along with the steering(zj tierod) and change the u-joints and wheel bearing since i already have those parts. then stretch the arms about an inch forward and adjust the caster a bit and hopefull ill be good to go every thing looked fine when i had it out before the swap too :/

