If they increase the lift just like the RC shackle relocation brackets do, then yes you will be at 4.5in total. I would recommend you look into the shackle relocation brackets that are sold on here, CF, that dont increase your lift but improve your shackle angle. Arorton just bought a set if I recall. Keep in mind you want a rig with a low center of gravity. 3in of lift on 31s will be perfect with slight trimming a bump stopping. Thats what I did.

 

I shouldn't have to bumpstop, I have my fenders cut so I'm good there and alright I'll look into it

 

What shocks do you currently have? I see you trimmed the fenders, looks good. Dont forget the front inner fender seam. Its sharp.

 

N2.0 series RC. Didn't even think about those and gotcha. I do kinda want a higher lift.

 

You will be fine at 4.5" just remember when you go up go out also

 

Would wheel spacers be enough? Ill be on 31x10.50x15 on 15x8 rims with 3.75 back spacing I believe.

 

Yes that's what I have is 3.75" back spacing Im running 35/12.50 on 8" rim. Rim width doesn't matter really BUT if you crawl it you will get alto better tire flex with less damage on a narrow rim

 

I am running a 1.5" wheel spacer works great

 

Cheaper than new wheels unless your going with cheap steelies

 

I don't want to go back and find it. But did I hear someone is going to smorr in April? We have a tentative date of April 20th for a camping tip there.

And there was also talk about whistling tb spacers... mine whistles... but its not constant. Only when I'm stepping into it... which I always thought was cool.

 

Ks rocks has wheeling on 4/20 as well. Smorr sounds like fun.

 

Hey guys, fellow Kansan just checking in and haven't been on in a long time... What's going on 4/20?

 

Where are you located?

 

Was thinking about going down for the weekend if April 13-14

 

On 31's you don't NEED a spacer. You can clear them with factory rims