kansas roll call!!
CF Veteran
Joined: Feb 2012
Posts: 2,652
Likes: 2
From: Kansas
Year: 1994
Model: Cherokee
Engine: 190-hp, 4.0-liter I-6
I googled mapped it and its a 5 hour drive! My jeep would have a heart attack but i can sure try, it'd be fun. If I were to go I'd have to do some camping
CF Veteran
Joined: Apr 2011
Posts: 2,857
Likes: 1
From: Raymore, Mo
Year: 1995
Model: Cherokee
Engine: 4.0

It's a three hour for me. So you could trailer down and make it a Friday night and sat night camping trip. Wheel all day Sat, then a little Sunday before leaving. They have camping in the park
CF Veteran
Joined: Feb 2012
Posts: 2,652
Likes: 2
From: Kansas
Year: 1994
Model: Cherokee
Engine: 190-hp, 4.0-liter I-6
Why are you concerned about that? And yea maybe you won't ride with me then id roll it

It's a three hour for me. So you could trailer down and make it a Friday night and sat night camping trip. Wheel all day Sat, then a little Sunday before leaving. They have camping in the park
CF Veteran
Joined: Apr 2011
Posts: 2,857
Likes: 1
From: Raymore, Mo
Year: 1995
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Feb 2012
Posts: 2,652
Likes: 2
From: Kansas
Year: 1994
Model: Cherokee
Engine: 190-hp, 4.0-liter I-6
CF Veteran
Joined: Apr 2011
Posts: 2,857
Likes: 1
From: Raymore, Mo
Year: 1995
Model: Cherokee
Engine: 4.0
hey guys I wanna ask your opinion and I know everyone is gonna have there own opinion and no need to get in a fight about it if you have a different opinion (putting that out there right now NO FIGHTING lol)
When I got my Jeep I thought the wheel bearings was going out and the rotors had some ware on them. So I got online and ordered 2 brand new cast hubs, 2 brand new cast rotors and a pair of brake pads. Well this weekend I went up to put my used tires on and to put the wheel bearings on and drive it home. I pulled the tires off and found out the slop and alignment was not because of the wheel bearings its because of ball joints and someone who said "they aligned it by tape measure" was actually blind and stupid. So now I'm going to put new ball joints and tie rod ends on it and get it professionally aligned. Here is what I want to know, if it was yours and you already have the wheel bearings and brakes would you go ahead and replace them since you already bought them or would you just send them back and get the money back
When I got my Jeep I thought the wheel bearings was going out and the rotors had some ware on them. So I got online and ordered 2 brand new cast hubs, 2 brand new cast rotors and a pair of brake pads. Well this weekend I went up to put my used tires on and to put the wheel bearings on and drive it home. I pulled the tires off and found out the slop and alignment was not because of the wheel bearings its because of ball joints and someone who said "they aligned it by tape measure" was actually blind and stupid. So now I'm going to put new ball joints and tie rod ends on it and get it professionally aligned. Here is what I want to know, if it was yours and you already have the wheel bearings and brakes would you go ahead and replace them since you already bought them or would you just send them back and get the money back
Junior Member
Joined: Aug 2009
Posts: 52
Likes: 0
From: New Richland Mn
Year: 1995
Model: Cherokee
Engine: 4.0L I-6
hey guys I wanna ask your opinion and I know everyone is gonna have there own opinion and no need to get in a fight about it if you have a different opinion (putting that out there right now NO FIGHTING lol)
When I got my Jeep I thought the wheel bearings was going out and the rotors had some ware on them. So I got online and ordered 2 brand new cast hubs, 2 brand new cast rotors and a pair of brake pads. Well this weekend I went up to put my used tires on and to put the wheel bearings on and drive it home. I pulled the tires off and found out the slop and alignment was not because of the wheel bearings its because of ball joints and someone who said "they aligned it by tape measure" was actually blind and stupid. So now I'm going to put new ball joints and tie rod ends on it and get it professionally aligned. Here is what I want to know, if it was yours and you already have the wheel bearings and brakes would you go ahead and replace them since you already bought them or would you just send them back and get the money back
When I got my Jeep I thought the wheel bearings was going out and the rotors had some ware on them. So I got online and ordered 2 brand new cast hubs, 2 brand new cast rotors and a pair of brake pads. Well this weekend I went up to put my used tires on and to put the wheel bearings on and drive it home. I pulled the tires off and found out the slop and alignment was not because of the wheel bearings its because of ball joints and someone who said "they aligned it by tape measure" was actually blind and stupid. So now I'm going to put new ball joints and tie rod ends on it and get it professionally aligned. Here is what I want to know, if it was yours and you already have the wheel bearings and brakes would you go ahead and replace them since you already bought them or would you just send them back and get the money back
Junior Member
Joined: Aug 2009
Posts: 52
Likes: 0
From: New Richland Mn
Year: 1995
Model: Cherokee
Engine: 4.0L I-6


