Jeep801 (sorry I'm horrible at names) what's the verdict/game plan for your fan problem?

Also did Carlos get his sway hooked back up???

 

my names mitchell.

im going to pull the radiator off in about 20 minutes to get a new one. i was told that i can put a ford taurs electric fan in it so im going to try that. has any one else heard that one?
and carlos decided that he was just going to see how it rides with them off so we left them off.

 

Let us know how that goes! The mounting would be my only concern... the wiring is cake!

 

OUCH...

 

but it was fun though wasn't it?

man that was a destructive weekend, but i enjoyed every minute of it.

 

Yes, yes it was. Enjoyed every minute of it. Well, I guess not EVERY minute. There was a few seconds right after the crunching sound that kinda sucked. BUt after that I was good again.

And screw the shaft, lucky # 5 i guess. Alloys will replace it.

 

Well right now it has a 3 in tuff country with 30/9.50 STT muds

 

Wow Cory! The real question is what alowed the winch to get friendly with your grille? Mangled bumper, frame, or mounting bolts???

 

Stupid phone!

 

will do my only concern is how to get it to power on at a certain temp.

 

One mod at a time & in the mean time come play on aome rocks!

Just splice it into the other e fan.

 

The winch isn't pushed in, everything else is falling forward/out. It broke all the mounts off the header panel and fenders, pushed the hood over and bent the hood pins. Broke the grille and headlight bezel. But i dont think the unibody itself is tweaked, just everything else. I was backing off Eagles nest on a bad angle, the Jeep tipped driver side and the front corner caught the wall otherwise it probably would have gone over.

 

A couple more weekends like that & she's gonna come out looking like Derek's! Lol

 

the taurus fan is a 2 speed fan also, putting one in an xj is not plug and play but it can be done.

here's a link to go jeeps install writeup, http://jeep-xj.info/HowtoTaurusFanInstall1.htm

this is a decent controller too. i ran it for a little while with no problems.
http://www.summitracing.com/parts/FLX-33011K

if you want it to come on at certain temps, get two controllers hook the low speed up to the factory circuit then the high speed up to come on at 240.

you saying mines beat? cause i think it's just barely broke in.

 

Im Diggin the carnage look myself! My carnage will have to start by "accident" one of these days when the wife isnt on the trail lol