Northern Utah BS thread
Senior Member
Joined: Nov 2009
Posts: 842
Likes: 0
From: SLC Utah
Year: 1998
Model: Cherokee
Engine: I6
i honestly dont know, tom is the one your going to want to talk to about that he just replaced his. did you do the ax15 swap or running the pudget or what ever they call it
CF Veteran
Joined: May 2009
Posts: 6,328
Likes: 1
From: SLC, UT
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
For the motor mounts they are cheaper at autozoo but checker will price match! I got them for I think $20, not bad.
The trans mount on the other hand I have no idea, but I think Jeff also replaced his...
The trans mount on the other hand I have no idea, but I think Jeff also replaced his...
Senior Member
Joined: Mar 2010
Posts: 500
Likes: 0
From: Logan, UT
Year: 1989
Model: Cherokee
Engine: 4.0L i6
good luck for the peugeot mount...
Only place I got mine was online and it is about $90 shipped....
I replaced mine and it is not too difficult. Just took 2 weeks to get it.
Dealer wanter $350 for it and Autozone/O'reilly don;t carry it.... their computer will give you the wrong part number be carefull
it is a huge tranny mount and also all manufacturers of other mount will say that tere is no replacement part for it.
I have heard of an adaptor plate and then be able to use the regular AX mount but I didn;t want to get that so I don;t have more info
Only place I got mine was online and it is about $90 shipped....
I replaced mine and it is not too difficult. Just took 2 weeks to get it.
Dealer wanter $350 for it and Autozone/O'reilly don;t carry it.... their computer will give you the wrong part number be carefull

it is a huge tranny mount and also all manufacturers of other mount will say that tere is no replacement part for it.
I have heard of an adaptor plate and then be able to use the regular AX mount but I didn;t want to get that so I don;t have more info
Senior Member
Joined: Mar 2010
Posts: 500
Likes: 0
From: Logan, UT
Year: 1989
Model: Cherokee
Engine: 4.0L i6
as far as my track bar, I finally managed to get it out.....
so I have decided to get a new one... they are not that pricey and I am not sure mine is not damaged. The TRE looking end is supposed to be pressed in and out and mine just fell off (next time remember not to keep your nose under)
So new one around $38 or just take a risk by changing the grease boot and bushing ($25).... I guess my choice is done....
so I have decided to get a new one... they are not that pricey and I am not sure mine is not damaged. The TRE looking end is supposed to be pressed in and out and mine just fell off (next time remember not to keep your nose under)
So new one around $38 or just take a risk by changing the grease boot and bushing ($25).... I guess my choice is done....
Senior Member
Joined: Jan 2010
Posts: 855
Likes: 0
From: Taylorsville, UT
Year: 1999
Model: Cherokee
Engine: 4.0L
Thread Starter
CF Veteran

Joined: Sep 2009
Posts: 3,612
Likes: 0
From: West Valley
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
The plan is to meet at the chevron @ 10:00 for the Lil Moab run, I'm thinking you might have the better idea with doing 5 mile though. I'm thinking LM's going to be to slick.


