New Mexico Roll Call.
CF Veteran
Joined: Sep 2013
Posts: 2,820
Likes: 5
From: Albuquerque, NM
Year: 1999
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Sep 2013
Posts: 2,820
Likes: 5
From: Albuquerque, NM
Year: 1999
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Sep 2013
Posts: 2,820
Likes: 5
From: Albuquerque, NM
Year: 1999
Model: Cherokee
Engine: 4.0
Damn, the older I get the less of a chance of finding a gem like that. Eh, Im going to beat it up and change everything maybe I should leave the super clean xjs to those who will keep it original and take care of it.
CF Veteran
Joined: Sep 2013
Posts: 2,820
Likes: 5
From: Albuquerque, NM
Year: 1999
Model: Cherokee
Engine: 4.0
Senior Member
Joined: Sep 2013
Posts: 706
Likes: 5
From: Los Lunas, NM
Year: 1996
Model: Cherokee
Engine: Straight six
i think 2.5 would be a little constricting but if it works then awesome.... here is the cowl intake all mocked up i need to put a few more coats of paint on it, and then paint the black parts of it, might put a little detail on the airbox to tie it all together, lemme know what you think
CF Veteran
Joined: Sep 2013
Posts: 2,820
Likes: 5
From: Albuquerque, NM
Year: 1999
Model: Cherokee
Engine: 4.0
i think 2.5 would be a little constricting but if it works then awesome.... here is the cowl intake all mocked up i need to put a few more coats of paint on it, and then paint the black parts of it, might put a little detail on the airbox to tie it all together, lemme know what you think
Senior Member
Joined: Sep 2013
Posts: 706
Likes: 5
From: Los Lunas, NM
Year: 1996
Model: Cherokee
Engine: Straight six
3"x2' black abs pipe
2 90*sharp "street" elbows
a stock air intake tube(breather hose)
3" metal hole bit
4 metal screws to hold breather hose on
2 90*sharp "street" elbows
a stock air intake tube(breather hose)
3" metal hole bit
4 metal screws to hold breather hose on
CF Veteran
Joined: Sep 2013
Posts: 2,820
Likes: 5
From: Albuquerque, NM
Year: 1999
Model: Cherokee
Engine: 4.0



