New Mexico Roll Call.
CF Veteran
Joined: Sep 2011
Posts: 1,874
Likes: 1
From: new mexico
Year: 88
Engine: 4.0
They are all supposed to be simple with the Spartan being the easiest. Desert rat threw it in for me when they were doing my gears. The cost to get the gears done was over 800.00 and I supplied everything that was just the labor. 4WD parts wanted 1,500.00 for the labor. I got my locker from a site called Broncoboneyard.com.
Senior Member
Joined: May 2013
Posts: 593
Likes: 0
I didn't have the confidence to try and set the backlash and pre-load. If that is not done properly you can ruin you diff or destroy your gears.
Seasoned Member
Joined: Sep 2013
Posts: 372
Likes: 0
From: Albuquerque New Mexico
Year: 2000
Model: Cherokee
Engine: 4.0
Pretty crazy just how cheap they are. I picked up a front and rear for $426. I can't wait toins tall them.
One down side of lokka or Aussie brand is that theyd on't come with a new cross pin. Although not necessary, it's highly recommended. I'm going to pick up 2 hardened pins for mine.
Seasoned Member
Joined: Sep 2013
Posts: 372
Likes: 0
From: Albuquerque New Mexico
Year: 2000
Model: Cherokee
Engine: 4.0
No, I just used masking tape to make a square cut line and slowly made a mark all the way around the shaft then just went after it. It came out pretty damn square.
Senior Member
Joined: May 2013
Posts: 593
Likes: 0
No, I just used masking tape to make a square cut line and slowly made a mark all the way around the shaft then just went after it. It came out pretty damn square.Pretty crazy just how cheap they are. I picked up a front and rear for $426. I can't wait toins tall them.
Last edited by Monster3663; Oct 27, 2013 at 10:34 AM.
Seasoned Member
Joined: Sep 2013
Posts: 372
Likes: 0
From: Albuquerque New Mexico
Year: 2000
Model: Cherokee
Engine: 4.0
It never ends!
CF Veteran
Joined: Sep 2013
Posts: 2,820
Likes: 5
From: Albuquerque, NM
Year: 1999
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Sep 2013
Posts: 1,922
Likes: 1
From: Eaton Co
Year: 2001
Model: Cherokee
Engine: 4.0
Senior Member
Joined: May 2013
Posts: 593
Likes: 0
If you ever saw the waterfall you would know what I mean about the Crazyman it's sorta like a can of whoopass. It's a crazy obstacle that only guys with lockers do and he made it look simple with only a rear LSD and a front open diff.
CF Veteran
Joined: Sep 2013
Posts: 2,820
Likes: 5
From: Albuquerque, NM
Year: 1999
Model: Cherokee
Engine: 4.0
Senior Member
Joined: May 2013
Posts: 593
Likes: 0
Glass 97-2001
Anyone need any glass for an XJ, I'm cleaning out Jeep stuff. Free Free Cargo area glass and door glass. it's off a 1998. 4 door. I got rid of a bunch of stuff today on CL. I now have room for the lawn tractor in the shed.
CF Veteran
Joined: Mar 2012
Posts: 3,404
Likes: 1
From: Albuquerque, NM
Year: 1995
Model: Cherokee
Engine: 4.0
this is the waterfall purple
most of us were all beat built and belly skid plated
the black cherokee made it bone stock but it also had a well experienced driver at the wheel. its not impossible but its not for beginners. the bronco was bought full built with manual lockers and gears. but the person driving it was a beginner and this was his first trip. he had to be winched up and punctured his has tank.
was a lot of fun. this is my other crew from nm off road.
most of us were all beat built and belly skid plated
the black cherokee made it bone stock but it also had a well experienced driver at the wheel. its not impossible but its not for beginners. the bronco was bought full built with manual lockers and gears. but the person driving it was a beginner and this was his first trip. he had to be winched up and punctured his has tank.
was a lot of fun. this is my other crew from nm off road.
Last edited by Jrock(fos); Oct 27, 2013 at 06:29 PM.