Four Corners BS thread!!
CF Veteran
Joined: Jun 2009
Posts: 3,071
Likes: 0
From: Denver, CO
Year: 1997
Model: Cherokee
Engine: 4.0
.
Junior Member
Joined: Aug 2010
Posts: 91
Likes: 0
From: BACKWOODS
Year: 1992
Model: Cherokee
Engine: gas
Sellin my 2dr Xj, 1993 4.0 HO, 5 speed, rustys short arm lift with 4.5 and 6.5 springs, 4.5 leafs, rock bumpers front and back, rock sliders, sye, roof rack, 33 bfg mt. need gears put in rear diff, but I have the parts. $3000.
CF Veteran
Joined: Jan 2011
Posts: 2,765
Likes: 0
From: Littleton, CO
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
come on over and check it out! i will be around all weekend. its really not a "new" project. i have had the jeep in my garage for 6 months, and it used to have dana 60's and 40 inch Iroks. it has some cracks in the unibody, so i gave up on it a while back......i decided the 2000 is too nice to hack all up and destroy it so im re-building the turd in my garage.
so far, its a four door chop top with a comanche cab to close it up. i am in the mid. of building a custom boatsided "bed".
axles and tire size is undetermened at this point, but its gonna be leafs at all four corners. the first jeep i built was a comanche on full widths and leaf swap up front and have regreted selling it since i did.(10 years ago)
i go thru track bars like they are going out of style and wear out ca bushings/joints really quick, hence the reason for the leaf swap.(and its super cheap) stability is king.......flex is over rated
have plans for a hybrid cage, with entirely too much tube.
so far, its a four door chop top with a comanche cab to close it up. i am in the mid. of building a custom boatsided "bed".
axles and tire size is undetermened at this point, but its gonna be leafs at all four corners. the first jeep i built was a comanche on full widths and leaf swap up front and have regreted selling it since i did.(10 years ago)
i go thru track bars like they are going out of style and wear out ca bushings/joints really quick, hence the reason for the leaf swap.(and its super cheap) stability is king.......flex is over rated
have plans for a hybrid cage, with entirely too much tube.
Last edited by MallCrawlXJ; Apr 23, 2011 at 09:08 AM.
CF Veteran
Joined: Jun 2009
Posts: 3,071
Likes: 0
From: Denver, CO
Year: 1997
Model: Cherokee
Engine: 4.0
come on over and check it out! i will be around all weekend. its really not a "new" project. i have had the jeep in my garage for 6 months, and it used to have dana 60's and 40 inch Iroks. it has some cracks in the unibody, so i gave up on it a while back......i decided the 2000 is too nice to hack all up and destroy it so im re-building the turd in my garage.
so far, its a four door chop top with a comanche cab to close it up. i am in the mid. of building a custom boatsided "bed".
axles and tire size is undetermened at this point, but its gonna be leafs at all four corners. the first jeep i built was a comanche on full widths and leaf swap up front and have regreted selling it since i did.(10 years ago)
i go thru track bars like they are going out of style and wear out ca bushings/joints really quick, hence the reason for the leaf swap.(and its super cheap) stability is king.......flex is over rated
have plans for a hybrid cage, with entirely too much tube.
so far, its a four door chop top with a comanche cab to close it up. i am in the mid. of building a custom boatsided "bed".
axles and tire size is undetermened at this point, but its gonna be leafs at all four corners. the first jeep i built was a comanche on full widths and leaf swap up front and have regreted selling it since i did.(10 years ago)
i go thru track bars like they are going out of style and wear out ca bushings/joints really quick, hence the reason for the leaf swap.(and its super cheap) stability is king.......flex is over rated
have plans for a hybrid cage, with entirely too much tube.
i can prob stop by later today if that's cool.
CF Veteran
Joined: Apr 2008
Posts: 13,952
Likes: 17
Model: Cherokee
Senior Member
Joined: May 2010
Posts: 745
Likes: 1
From: Here, There, Everywhere
Year: 1997
Model: Grand Cherokee
Engine: 5.2
CF Veteran
Joined: Jan 2011
Posts: 2,765
Likes: 0
From: Littleton, CO
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
going to pull some full width axles for my xjuggy project today!!
it was entirerly too easy to talk the boss into letting me have the day off to go pull them.
started a build thread... https://www.cherokeeforum.com/f46/xj...rebuild-87948/
it was entirerly too easy to talk the boss into letting me have the day off to go pull them.
started a build thread... https://www.cherokeeforum.com/f46/xj...rebuild-87948/
Last edited by MallCrawlXJ; May 4, 2011 at 06:45 AM.
CF Veteran
Joined: Jan 2011
Posts: 2,765
Likes: 0
From: Littleton, CO
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
CF Veteran
Joined: Jun 2009
Posts: 3,071
Likes: 0
From: Denver, CO
Year: 1997
Model: Cherokee
Engine: 4.0
Senior Member
Joined: Apr 2011
Posts: 858
Likes: 0
From: parker, co
Year: 1996
Model: Cherokee
Engine: 4.0 HO
I've always seen trucks/dirtbikes etc in there so when I drove by for work one day i looked and there was a chain blocking it. So not sure of the rules there.
