Arizona
finally got my steering-pull issue ironed out. it's truly amazing what half inch on a track bar can do.....
In all seriousness the front axle was shifted over probably a good inch to the driver's side causing it to pull left pretty hard.. I searched a bunch of threads on "steering pull" and such. The common answers were:
bad alignment(i guess this kinda applies)
sticky/seizing brakes
collapsed brake lines
air in brake lines
improper MC/proportioning valve install or bleed
tire pressure
bad tires
bent axle
bad ball joints or bushings
uneven adjustable arm lengths
incorrect steering geometry
bad TREs
****ty steering in general
thrust steer from misaligned rear axle
and finally offset front axle.
Needless to say, it's my fault for checking one of the easiest things last. I had "eye ball" centered the axle before but the truth came out when i started measuring things.
moral of the story is make sure your front axle is centered
In all seriousness the front axle was shifted over probably a good inch to the driver's side causing it to pull left pretty hard.. I searched a bunch of threads on "steering pull" and such. The common answers were:
bad alignment(i guess this kinda applies)
sticky/seizing brakes
collapsed brake lines
air in brake lines
improper MC/proportioning valve install or bleed
tire pressure
bad tires
bent axle
bad ball joints or bushings
uneven adjustable arm lengths
incorrect steering geometry
bad TREs
****ty steering in general
thrust steer from misaligned rear axle
and finally offset front axle.
Needless to say, it's my fault for checking one of the easiest things last. I had "eye ball" centered the axle before but the truth came out when i started measuring things.
moral of the story is make sure your front axle is centered
Member
Joined: Apr 2010
Posts: 139
Likes: 0
From: Queen Creek , Az
Year: 1990
Model: Cherokee
Engine: 4.0l
Seasoned Member
Joined: Nov 2011
Posts: 298
Likes: 0
From: Arizona
Year: 1996
Model: Cherokee
Engine: 4.0l
FYI there is a WJ sitting in the premeir lot at the picknpull chandler. It's waiting to have the knuckles stripped for your XJ!
Last edited by needxj; May 12, 2012 at 10:38 PM.
Junior Member
Joined: Mar 2011
Posts: 71
Likes: 0
From: glendale az
Year: 1988
Model: Cherokee
Engine: 4.0
Originally Posted by MCC.XJ4x4
Speaking of junk yards, does anyone know of a 4x4 only yard?
Seasoned Member
Joined: Nov 2011
Posts: 298
Likes: 0
From: Arizona
Year: 1996
Model: Cherokee
Engine: 4.0l
Originally Posted by Corymister
how much is it to do a bastard pack lift?



just thought id share