LAS VEGAS XJ GROUP-----> 1st ROLL CALL.
The prob trying to buy right now is that it's tax time so everyone is asking a lot more since people are getting money back. If I see a good one I'll let you know. If you want text me you number and I'll call or text you if I see one. 702-858-7650 my name is Kyle
Have you tried shifting manually, starting in 1-2? Mine blew a fuse for the neutral safety switch because of the low washer fluid light flashing . Caused the same issue. It wouldn't downshift unless I did it manually
But if you're worried let gravity take effect, jack up front of vehicle so fluid falls to back of pumpkin
Senior Member
Joined: Feb 2010
Posts: 681
Likes: 1
From: errrvre where
Year: 1996
Model: Cherokee
Engine: I6 4.0L HO, JBA headers, 99 intake, #703 injectors
hey guys, about 3 months ago I smashed my jeep I planned to fix it but when I pulled the radiator off it was coated in oil. I took a lot apart in an attempt to fix it but by a process of being screwed over a ton of times ive decided to either sell it as a whole or part it out. the engine bay is torn apart and the front is smashed. im trying to get rid of it before at least march. if you guys need any mods or parts message me and let me know. I hardly ever read this thread.
all parts are for sale
mods include :
6.5" iro long arm i have 6.5 and 4.5" coils
4.5" re leafs w/ rc shackles
Billstein 5165s, the ones with reservoirs
35x12.5x15 bfg km2s on 15x8 steelies
iro hack n tap sye w/ double cardinal driveshaft
95 cherokee hp dana 30 4.56 gears
00 explorer 8.8 w/ disk breaks and lsd 4.56 gears
37 tooth speedo gear
iro otk hiem steering
clayton panhard bar w/ 9/16s hardware
clayton panhard bar drop and normal bracket
99 intake
JBA headers
60mm bored throttle body
precision starter
e3 spark plugs
bwd wire set
bwd distributer cap
bwd rotor
bwd ignition coil
4 port injectors
rear bumper w/ tire carrier
rock sliders
sony explode stereo head
5.25 explode front speakers
5.25 kenwood rear speakers
this may not be a complete part out, I may scrap the rest by late January early February if necessary however it would be a waste for the good parts to not go to someone in need.
all parts are for sale
mods include :
6.5" iro long arm i have 6.5 and 4.5" coils
4.5" re leafs w/ rc shackles
Billstein 5165s, the ones with reservoirs
35x12.5x15 bfg km2s on 15x8 steelies
iro hack n tap sye w/ double cardinal driveshaft
95 cherokee hp dana 30 4.56 gears
00 explorer 8.8 w/ disk breaks and lsd 4.56 gears
37 tooth speedo gear
iro otk hiem steering
clayton panhard bar w/ 9/16s hardware
clayton panhard bar drop and normal bracket
99 intake
JBA headers
60mm bored throttle body
precision starter
e3 spark plugs
bwd wire set
bwd distributer cap
bwd rotor
bwd ignition coil
4 port injectors
rear bumper w/ tire carrier
rock sliders
sony explode stereo head
5.25 explode front speakers
5.25 kenwood rear speakers
this may not be a complete part out, I may scrap the rest by late January early February if necessary however it would be a waste for the good parts to not go to someone in need.
apologies for the timing. it has taken forever to find time to finally start ripping into the jeep. most of these items are now out of the jeep and ready for pickup. the only things that have been sold so far are the seats and center counsel. if you guys see anything you may need, give me a call
2035981413
you can message me here aswell but it may take longer for me to respond as I am not on this forum everyday like I use to.
this is first come first serve basis with good prices and deals.
price listing:
-6.5" iro long arm i have 6.5 and 4.5" coils- 30 per coil. 6.5 iro @ 230 pounds 4.5" clayton @ 170 pounds
-4.5" re leafs w/ rc shackles includes brand new bushings- 60 per leaf 4.5"re @ 170 pounds.
-Billstein 5165s, the ones with reservoirs - 100 each.
-35x12.5x15 bfg km2s on 15x8 steelies - 700 for all 5
-iro hack n tap sye w/ double cardinal driveshaft- 80 for the setup. 8.8 flange is installed on the end joint
-95 cherokee hp dana 30 4.56 gears - 500, brakes includes
-00 explorer 8.8 w/ disk breaks and lsd 4.56 gears- 500, brakes included
-iro otk hiem steering - 100 comes with brand new joints and clamps in the packaging
-clayton panhard bar w/ 9/16s hardware - 100 bracket included, drop bracket free
-99 intake- 50
-JBA headers- 250
-60mm bored throttle body-25
-e3 spark plugs
bwd wire set
bwd distributer cap
bwd rotor
bwd ignition coil - 25 for all ignition setup
-4 port injectors- 50
-rear bumper w/ tire carrier-250
-rock sliders-100 each or 200 for both
-sony explode stereo head
5.25 explode front speakers
5.25 kenwood rear speakers- 40 for all stereo equipment. includes an 800 watt amp and wiring.
most hardware is useable and in good condition.
any small items you may want to take off the shell before I cann it are free
Last edited by Allusion; Feb 22, 2014 at 05:48 PM.
U guys think it's ok to mount a winch bumper without the tie in brackets for now? Reason is one of my steering bolts snapped off when I tried to do the drivers side tie in now I'm worried about the other bolts snapping as well. The remaining piece of the bolt is lodged in the steering gear box. Was wondering if I could get away with mounting the bumper without it for now
apologies for the timing. it has taken forever to find time to finally start ripping into the jeep. most of these items are now out of the jeep and ready for pickup. the only things that have been sold so far are the seats and center counsel. if you guys see anything you may need, give me a call
2035981413
you can message me here aswell but it may take longer for me to respond as I am not on this forum everyday like I use to.
this is first come first serve basis with good prices and deals.
price listing:
-6.5" iro long arm i have 6.5 and 4.5" coils- 30 per coil. 6.5 iro @ 230 pounds 4.5" clayton @ 170 pounds
-4.5" re leafs w/ rc shackles includes brand new bushings- 60 per leaf 4.5"re @ 170 pounds.
-Billstein 5165s, the ones with reservoirs - 100 each.
-35x12.5x15 bfg km2s on 15x8 steelies - 700 for all 5
-iro hack n tap sye w/ double cardinal driveshaft- 80 for the setup. 8.8 flange is installed on the end joint
-95 cherokee hp dana 30 4.56 gears - 500, brakes includes
-00 explorer 8.8 w/ disk breaks and lsd 4.56 gears- 500, brakes included
-iro otk hiem steering - 100 comes with brand new joints and clamps in the packaging
-clayton panhard bar w/ 9/16s hardware - 100 bracket included, drop bracket free
-99 intake- 50
-JBA headers- 250
-60mm bored throttle body-25
-e3 spark plugs
bwd wire set
bwd distributer cap
bwd rotor
bwd ignition coil - 25 for all ignition setup
-4 port injectors- 50
-rear bumper w/ tire carrier-250
-rock sliders-100 each or 200 for both
-sony explode stereo head
5.25 explode front speakers
5.25 kenwood rear speakers- 40 for all stereo equipment. includes an 800 watt amp and wiring.
most hardware is useable and in good condition.
any small items you may want to take off the shell before I cann it are free
2035981413
you can message me here aswell but it may take longer for me to respond as I am not on this forum everyday like I use to.
this is first come first serve basis with good prices and deals.
price listing:
-6.5" iro long arm i have 6.5 and 4.5" coils- 30 per coil. 6.5 iro @ 230 pounds 4.5" clayton @ 170 pounds
-4.5" re leafs w/ rc shackles includes brand new bushings- 60 per leaf 4.5"re @ 170 pounds.
-Billstein 5165s, the ones with reservoirs - 100 each.
-35x12.5x15 bfg km2s on 15x8 steelies - 700 for all 5
-iro hack n tap sye w/ double cardinal driveshaft- 80 for the setup. 8.8 flange is installed on the end joint
-95 cherokee hp dana 30 4.56 gears - 500, brakes includes
-00 explorer 8.8 w/ disk breaks and lsd 4.56 gears- 500, brakes included
-iro otk hiem steering - 100 comes with brand new joints and clamps in the packaging
-clayton panhard bar w/ 9/16s hardware - 100 bracket included, drop bracket free
-99 intake- 50
-JBA headers- 250
-60mm bored throttle body-25
-e3 spark plugs
bwd wire set
bwd distributer cap
bwd rotor
bwd ignition coil - 25 for all ignition setup
-4 port injectors- 50
-rear bumper w/ tire carrier-250
-rock sliders-100 each or 200 for both
-sony explode stereo head
5.25 explode front speakers
5.25 kenwood rear speakers- 40 for all stereo equipment. includes an 800 watt amp and wiring.
most hardware is useable and in good condition.
any small items you may want to take off the shell before I cann it are free
Interested in shocks but won't have money come pay day. Also interested in axles but still won't have money till pay day since I had to drop some doe on a tranny rebuild for my daily driver
CF Veteran
Joined: Nov 2011
Posts: 1,314
Likes: 0
From: Las Vegas, NV - St. George, UT
Year: 1996
Model: Cherokee
Engine: 4.0
Just got back from St George and there are a ton of XJs up there if you are interested. From stock to an insane green one on 37s that looked like its on steroids.
CF Veteran
Joined: Nov 2011
Posts: 1,314
Likes: 0
From: Las Vegas, NV - St. George, UT
Year: 1996
Model: Cherokee
Engine: 4.0
U guys think it's ok to mount a winch bumper without the tie in brackets for now? Reason is one of my steering bolts snapped off when I tried to do the drivers side tie in now I'm worried about the other bolts snapping as well. The remaining piece of the bolt is lodged in the steering gear box. Was wondering if I could get away with mounting the bumper without it for now
apologies for the timing. it has taken forever to find time to finally start ripping into the jeep. most of these items are now out of the jeep and ready for pickup. the only things that have been sold so far are the seats and center counsel. if you guys see anything you may need, give me a call 2035981413 you can message me here aswell but it may take longer for me to respond as I am not on this forum everyday like I use to. this is first come first serve basis with good prices and deals. price listing: -6.5" iro long arm i have 6.5 and 4.5" coils- 30 per coil. 6.5 iro @ 230 pounds 4.5" clayton @ 170 pounds -4.5" re leafs w/ rc shackles includes brand new bushings- 60 per leaf 4.5"re @ 170 pounds. -Billstein 5165s, the ones with reservoirs - 100 each. -35x12.5x15 bfg km2s on 15x8 steelies - 700 for all 5 -iro hack n tap sye w/ double cardinal driveshaft- 80 for the setup. 8.8 flange is installed on the end joint -95 cherokee hp dana 30 4.56 gears - 500, brakes includes -00 explorer 8.8 w/ disk breaks and lsd 4.56 gears- 500, brakes included -iro otk hiem steering - 100 comes with brand new joints and clamps in the packaging -clayton panhard bar w/ 9/16s hardware - 100 bracket included, drop bracket free -99 intake- 50 -JBA headers- 250 -60mm bored throttle body-25 -e3 spark plugs bwd wire set bwd distributer cap bwd rotor bwd ignition coil - 25 for all ignition setup -4 port injectors- 50 -rear bumper w/ tire carrier-250 -rock sliders-100 each or 200 for both -sony explode stereo head 5.25 explode front speakers 5.25 kenwood rear speakers- 40 for all stereo equipment. includes an 800 watt amp and wiring. most hardware is useable and in good condition. any small items you may want to take off the shell before I cann it are free


