LAS VEGAS XJ GROUP-----> 1st ROLL CALL.
CF Veteran
Joined: Feb 2011
Posts: 1,944
Likes: 0
From: Henderson, NV
Year: 1999
Engine: 4.0L
Senior Member
Joined: Aug 2013
Posts: 556
Likes: 0
From: Henderson, NV
Year: 1996
Model: Cherokee
Engine: 4.0l inline 6 stock
Junior Member
Joined: May 2012
Posts: 30
Likes: 0
From: Anchorage, AK
Year: 2001
Model: Cherokee
Engine: 4.0L I6 MPI "Power Tech HO" (High Output) - 190 hp @ 4750 rpm, 225 ft lb @ 3,000 rpm
Seasoned Member
Joined: May 2013
Posts: 341
Likes: 0
From: Las vegas
Year: 1990
Model: Cherokee
Engine: 4.0l straight 6
CF Veteran
Joined: Mar 2013
Posts: 1,332
Likes: 0
Model: Cherokee
Member
Joined: Dec 2013
Posts: 247
Likes: 0
From: Las Vegas
Year: 1996
Model: Cherokee
Engine: 4.0
Thinking about ordering some frame reinforcements specifically this but I don't have access to a welder nor can I weld yet(need to take some classes). Is their a local shop you guys would recommend or someone you know who can help a guy out?
I want to do this before adding some AJ supersliders.
These plates cover the area where the stock lower control arms mount so I would assume the best thing to do is cut off the forward 9" piece until I go long arm and then when I LA and hack the stock mounts off I can have the 9" piece welded on and fish plate the pieces together.
I plan on picking up an IRO 5.5 LA kit, IRO OTK steering and some 35"s eventually but I want to get my axles squared away(8.25 swap), frame stiffening, sliders, bumper/winch?, and general maintenance first.
I want to do this before adding some AJ supersliders.
These plates cover the area where the stock lower control arms mount so I would assume the best thing to do is cut off the forward 9" piece until I go long arm and then when I LA and hack the stock mounts off I can have the 9" piece welded on and fish plate the pieces together.
I plan on picking up an IRO 5.5 LA kit, IRO OTK steering and some 35"s eventually but I want to get my axles squared away(8.25 swap), frame stiffening, sliders, bumper/winch?, and general maintenance first.
CF Veteran
Joined: Mar 2013
Posts: 1,332
Likes: 0
Model: Cherokee
Thinking about ordering some frame reinforcements specifically this but I don't have access to a welder nor can I weld yet(need to take some classes). Is their a local shop you guys would recommend or someone you know who can help a guy out?
I want to do this before adding some AJ supersliders.
These plates cover the area where the stock lower control arms mount so I would assume the best thing to do is cut off the forward 9" piece until I go long arm and then when I LA and hack the stock mounts off I can have the 9" piece welded on and fish plate the pieces together.
I plan on picking up an IRO 5.5 LA kit, IRO OTK steering and some 35"s eventually but I want to get my axles squared away(8.25 swap), frame stiffening, sliders, bumper/winch?, and general maintenance first.
I want to do this before adding some AJ supersliders.
These plates cover the area where the stock lower control arms mount so I would assume the best thing to do is cut off the forward 9" piece until I go long arm and then when I LA and hack the stock mounts off I can have the 9" piece welded on and fish plate the pieces together.
I plan on picking up an IRO 5.5 LA kit, IRO OTK steering and some 35"s eventually but I want to get my axles squared away(8.25 swap), frame stiffening, sliders, bumper/winch?, and general maintenance first.
I can help with the stiffeners , just need to swap my bottle for my welder. Plus I'd like to do someone else's stiffeners before I do mine
haha.I'm runnin the IRO 5.5 LA kit and absolutely love it!!
I am the inspector at ted wiens on blue diamond and arville so If u want for FREE you can bring in the heep and I can do a once over let you know what maintenance and/or other stuff I see
I also do side work from my house so I can help u out with that stuff if needed
Seasoned Member
Joined: May 2013
Posts: 341
Likes: 0
From: Las vegas
Year: 1990
Model: Cherokee
Engine: 4.0l straight 6
