LAS VEGAS XJ GROUP-----> 1st ROLL CALL.
Newbie
Joined: Jan 2010
Posts: 17
Likes: 0
From: N. Las Vegas
Model: Cherokee
any dana 35 owners want an Auburn ECTED e-locker for 500 send me a pm nw las vegas i can get pics as soon as i get back from a business trip
Last edited by 96greenxj; Nov 18, 2012 at 10:07 PM.
CF Veteran
Joined: Nov 2011
Posts: 1,314
Likes: 0
From: Las Vegas, NV - St. George, UT
Year: 1996
Model: Cherokee
Engine: 4.0
I have my plate on top of the u-bolt plate. Should I need to remove the bumpstop plate, I will not need to remove the u-bolts. Also gave me about 1/2" more height overall. Worth a shot if you still have them.
CF Veteran
Joined: Feb 2011
Posts: 1,944
Likes: 0
From: Henderson, NV
Year: 1999
Engine: 4.0L
So what would you guys do...
I have the opportunity to trade wheels/tires with someone. They have 16" moabs with some what new 245/75/16 Falken Wildpeak ATs. My 31s are around 9 months old.
245/75/16 = ~30.8x10
1. The falkens are a hair shorter and narrower.
2. I really REALLY like moabs on XJs
3. I would upgrade to a 32" tire eventually.
4. With my spacers the backspacing would be 3.5". Which would look badass with my fender flares.
5. Did I say I like moabs?
What would you do? I really can't decide.
His wheels:
Mine:
I have the opportunity to trade wheels/tires with someone. They have 16" moabs with some what new 245/75/16 Falken Wildpeak ATs. My 31s are around 9 months old.
245/75/16 = ~30.8x10
1. The falkens are a hair shorter and narrower.
2. I really REALLY like moabs on XJs
3. I would upgrade to a 32" tire eventually.
4. With my spacers the backspacing would be 3.5". Which would look badass with my fender flares.
5. Did I say I like moabs?
What would you do? I really can't decide.
His wheels:
Mine:
Last edited by Photojared; Nov 19, 2012 at 01:08 AM.
CF Veteran
Joined: Nov 2011
Posts: 1,314
Likes: 0
From: Las Vegas, NV - St. George, UT
Year: 1996
Model: Cherokee
Engine: 4.0
I would do it. Falkens are noisy on the road, they have a hum over 25. I think your 31s are the same height overall, but you will be swapping tires later anyways. And Moabs are hard to get for cheap too.
CF Veteran
Joined: Feb 2011
Posts: 1,944
Likes: 0
From: Henderson, NV
Year: 1999
Engine: 4.0L
Thread Starter
Senior Member
Joined: May 2011
Posts: 841
Likes: 0
From: Las Vegas, Nevada
Engine: 4.0L
Senior Member
Joined: Feb 2010
Posts: 681
Likes: 1
From: errrvre where
Year: 1996
Model: Cherokee
Engine: I6 4.0L HO, JBA headers, 99 intake, #703 injectors
FS!
RE single sheer adj. trac-bar. used and slightly abused. small dings and scratches. rubber bushing axle side and heim joint frame side still intact. comes with predrilled and attached stock frame side mount.
good upgrade from the stock bar.
30 bucks and its yours for the takeing!
normaly sold new at upwords of 150!
can post pics if nessassary, i do not have any currently.
msg or text/call me @ 2035981413
if i dont answer im at work please leave a message!
Edit: i also have a free stock speedo gear if anyone is in need.
good upgrade from the stock bar.
30 bucks and its yours for the takeing!
normaly sold new at upwords of 150!
can post pics if nessassary, i do not have any currently.
msg or text/call me @ 2035981413
if i dont answer im at work please leave a message!
Edit: i also have a free stock speedo gear if anyone is in need.
CF Veteran
Joined: Nov 2011
Posts: 1,314
Likes: 0
From: Las Vegas, NV - St. George, UT
Year: 1996
Model: Cherokee
Engine: 4.0
If anyone is interested I found my old Hypertech Power Programmer. Part # 50012 for use on 1996-2004 Jeep 4.0L only.
Listed on CL as well. Asking $150 OBO for it. It is not VIN locked either. I have no need for it. Used it on my '97 XJ and '04 TJ with butt dyno results. Both were returned back to stock so this unit is ready to go.
If it doesn't sell I will try it out on the current '96 and see what happens.
Make an offer! Cleaning out my garage... again LOL. Every time I do to make more room, I end up with less space on my shelves.
Listed on CL as well. Asking $150 OBO for it. It is not VIN locked either. I have no need for it. Used it on my '97 XJ and '04 TJ with butt dyno results. Both were returned back to stock so this unit is ready to go.
If it doesn't sell I will try it out on the current '96 and see what happens.
Make an offer! Cleaning out my garage... again LOL. Every time I do to make more room, I end up with less space on my shelves.
Senior Member
Joined: Apr 2012
Posts: 954
Likes: 1
From: Vegas
Year: 1992
Model: Cherokee
Engine: I6
Some friends and I are planning a trail run this weekend, if anyone wants to come. Ill post more info as I know it
On a side note I got bored at one of my RC comps and the people there decided to tape it and put it on the tube haha gah I hate open diffs
click here
On a side note I got bored at one of my RC comps and the people there decided to tape it and put it on the tube haha gah I hate open diffs
click here
Last edited by The_ocho; Nov 21, 2012 at 07:58 PM.