LAS VEGAS XJ GROUP-----> 1st ROLL CALL.
Member
Joined: May 2011
Posts: 183
Likes: 0
From: North Las Vegas, NV
Year: 1992
Model: Cherokee
Engine: 4L I6 MPI "Power Tech HO"
Nice! I hope all goes well with your slave cylinder!
I got my slave and a clutch kit but I am trying to do a conversion to 4wd on my XJ. You guys know of an ax-15 or transfer case being sold in the local area?
I got my slave and a clutch kit but I am trying to do a conversion to 4wd on my XJ. You guys know of an ax-15 or transfer case being sold in the local area?
CF Veteran
Joined: Jul 2012
Posts: 1,185
Likes: 5
From: Pahrump, NV
Year: 1996
Model: Cherokee
Engine: 4.0L
Originally Posted by sandfish88
yeahh 112 at my doorstep. Glad you got up to the mtns. I like sheep range. Aka "badlands" Its usually muddy and nasty when it rains.Going to get my slave cylinder tonight. ***** should be running tomorrow!
Junior Member
Joined: May 2012
Posts: 79
Likes: 2
From: Henderson, NV
Year: 1988
Model: Cherokee
Engine: 4.0L
Hey, whats up, i just moved out here from the bay area. wondering if there are any meets out here. Im staying over off horizon ridge and eastern if there is any on this side of town.
CF Veteran
Joined: Feb 2011
Posts: 1,944
Likes: 0
From: Henderson, NV
Year: 1999
Engine: 4.0L
Originally Posted by JoshuaMishler
Hey, whats up, i just moved out here from the bay area. wondering if there are any meets out here. Im staying over off horizon ridge and eastern if there is any on this side of town.
Thread Starter
Senior Member
Joined: May 2011
Posts: 841
Likes: 0
From: Las Vegas, Nevada
Engine: 4.0L
Yea my rough country shocks suck. One drive through the dirt and it feels like I am riding on bricks.
Ordered my SYE. No free time til the end of the month to install. Need to get it installed before Moab in October though.
October 19-21. If anyone wants to go. Some friends from Utah Xterra Owners Club will be there too. Leaving on the 18th since its a 460 mile drive.
Ordered my SYE. No free time til the end of the month to install. Need to get it installed before Moab in October though.
October 19-21. If anyone wants to go. Some friends from Utah Xterra Owners Club will be there too. Leaving on the 18th since its a 460 mile drive.
wassup fellas! havent been here for awhile. ive been keeping tabs tho. fyi, im still interested in wheelin with u all sometime soon. i still havent gotten around replacing the OFA o rings yet, but at least my rig gets a fresh quart of oil every week! lol! and my driveway looks like the exxon valdez catastrophe. but my jeep is still running strong. although it got the baby lift on it, just wanted to touch bases with the fabricators/welders here to see how much itll take to put together a roof rack for my spare and a pair of sliders. i would really appreciate the info for my short term goals for my rig. i teach muay thai at the new RYU mma gym (formerly tapout) and would be willing to trade private lessons for this and that for my rig. thanks everyone! hope to see yall soon!
Give us a week or two and Ill organize a wheeler pass to rocky gap run. Should be nice and cool up there.
Last edited by sandfish88; Aug 8, 2012 at 02:03 AM.
Junior Member
Joined: May 2012
Posts: 79
Likes: 2
From: Henderson, NV
Year: 1988
Model: Cherokee
Engine: 4.0L
I dont have a whole lot done to her yet. Just rancho 9000 shocks, and 30x9.5 tires on american racing wheels. the rear leafs are sagging pretty bad so she bottoms out alot. But for an 88 pioneer she still runs great, and takes everything i throw at her.
Senior Member
Joined: Mar 2011
Posts: 522
Likes: 0
From: Las Vegas
Year: 1992
Model: Cherokee
Engine: 4.oL H.O. 784 injectors, EV6 to EV1 connectors, APN header, Dynomax exhaust
I hated the RC Nitro's on mine. Our last pipeline run broke my RC shocks...well not so much broke more bent one really bad...then again I was climbing those big a$$ concrete stairs out of that retaining area too.....probably had something to do with it
CF Veteran
Joined: Jul 2012
Posts: 1,185
Likes: 5
From: Pahrump, NV
Year: 1996
Model: Cherokee
Engine: 4.0L
Originally Posted by njbozic
Almost finished swing tire carrier !!!!!!!
CF Veteran
Joined: Jan 2011
Posts: 1,894
Likes: 4
From: Las Vegas
Year: 1999
Model: Cherokee
Engine: 4.0
97+ CB antenna mount
Have a set of brand new 97+ XJ CB antenna mount complete with 18ft cable and 4ft antenna from 98Plum for sale.
Looking at $65
Pics copied from his thread.
Pls note that mine is on the driver's side.
Looking at $65
Pics copied from his thread.
Pls note that mine is on the driver's side.
Thread Starter
Senior Member
Joined: May 2011
Posts: 841
Likes: 0
From: Las Vegas, Nevada
Engine: 4.0L
CF Veteran
Joined: Nov 2011
Posts: 1,314
Likes: 0
From: Las Vegas, NV - St. George, UT
Year: 1996
Model: Cherokee
Engine: 4.0
Been there. Flexed em too. Disco'd rides nice. Connected rides like crap. Might hit up pipeline again before Moab. Can't wait to get out there again!
Senior Member
Joined: Apr 2012
Posts: 954
Likes: 1
From: Vegas
Year: 1992
Model: Cherokee
Engine: I6
So I should be getting back into town in September. I'll have a few parts available then if any locals are interested.
1, Pro comp RS3000 Front shocks for 2 or 3 in lift. they only have about 3,000 miles on them. Going to swap up to some longer shocks to go with my setup. $40 for the pair.
2. Sway bar drop brackets, DriverX gave me them from his lift but I will not be needing them. no hardware just the brackets you just gotta go get 4 bolts, nuts, and washers. Free to a good home.
3. new in package RE Tcase drop. bolts and Alloy spacers. I got this from Photojared (and I still owe him the $20 for it lol when ever we meet up again) $20 takes it.
4. stock Tie rod needs new ends, free to a good home.
5. stock lower control arms, I know nobody will want em but if you need em let me know so I dont just toss them, free to a good home.
6. 92/3 stock sport 10 hole wheels. some rock rash.. actually I think they all have some on the lip, one has some messed up lug holes but they still balance out perfectly. they have 235/75s mounted on them tho the tires are showing their age haha they still hold air and have lasted a few trail runs. the one on the right rear is the worst, you can see the white on the sidewall. If anyone wants these make me an offer.
Pic related, Wheels/Tires and shocks
1, Pro comp RS3000 Front shocks for 2 or 3 in lift. they only have about 3,000 miles on them. Going to swap up to some longer shocks to go with my setup. $40 for the pair.
2. Sway bar drop brackets, DriverX gave me them from his lift but I will not be needing them. no hardware just the brackets you just gotta go get 4 bolts, nuts, and washers. Free to a good home.
3. new in package RE Tcase drop. bolts and Alloy spacers. I got this from Photojared (and I still owe him the $20 for it lol when ever we meet up again) $20 takes it.
4. stock Tie rod needs new ends, free to a good home.
5. stock lower control arms, I know nobody will want em but if you need em let me know so I dont just toss them, free to a good home.
6. 92/3 stock sport 10 hole wheels. some rock rash.. actually I think they all have some on the lip, one has some messed up lug holes but they still balance out perfectly. they have 235/75s mounted on them tho the tires are showing their age haha they still hold air and have lasted a few trail runs. the one on the right rear is the worst, you can see the white on the sidewall. If anyone wants these make me an offer.
Pic related, Wheels/Tires and shocks
Thread Starter
Senior Member
Joined: May 2011
Posts: 841
Likes: 0
From: Las Vegas, Nevada
Engine: 4.0L
So I should be getting back into town in September. I'll have a few parts available then if any locals are interested.
1, Pro comp RS3000 Front shocks for 2 or 3 in lift. they only have about 3,000 miles on them. Going to swap up to some longer shocks to go with my setup. $40 for the pair.
2. Sway bar drop brackets, DriverX gave me them from his lift but I will not be needing them. no hardware just the brackets you just gotta go get 4 bolts, nuts, and washers. Free to a good home.
3. new in package RE Tcase drop. bolts and Alloy spacers. I got this from Photojared (and I still owe him the $20 for it lol when ever we meet up again) $20 takes it.
4. stock Tie rod needs new ends, free to a good home.
5. stock lower control arms, I know nobody will want em but if you need em let me know so I dont just toss them, free to a good home.
6. 92/3 stock sport 10 hole wheels. some rock rash.. actually I think they all have some on the lip, one has some messed up lug holes but they still balance out perfectly. they have 235/75s mounted on them tho the tires are showing their age haha they still hold air and have lasted a few trail runs. the one on the right rear is the worst, you can see the white on the sidewall. If anyone wants these make me an offer.
Pic related, Wheels/Tires and shocks
1, Pro comp RS3000 Front shocks for 2 or 3 in lift. they only have about 3,000 miles on them. Going to swap up to some longer shocks to go with my setup. $40 for the pair.
2. Sway bar drop brackets, DriverX gave me them from his lift but I will not be needing them. no hardware just the brackets you just gotta go get 4 bolts, nuts, and washers. Free to a good home.
3. new in package RE Tcase drop. bolts and Alloy spacers. I got this from Photojared (and I still owe him the $20 for it lol when ever we meet up again) $20 takes it.
4. stock Tie rod needs new ends, free to a good home.
5. stock lower control arms, I know nobody will want em but if you need em let me know so I dont just toss them, free to a good home.
6. 92/3 stock sport 10 hole wheels. some rock rash.. actually I think they all have some on the lip, one has some messed up lug holes but they still balance out perfectly. they have 235/75s mounted on them tho the tires are showing their age haha they still hold air and have lasted a few trail runs. the one on the right rear is the worst, you can see the white on the sidewall. If anyone wants these make me an offer.
Pic related, Wheels/Tires and shocks
Ill take the tie rod for jamil, his is bent to **** causing horribly uneven tire wear.
and as long as there is No deep gouges, Ill take the wheels and tires.
call me 702-553-7433
jim
ps.. my old rock sliders look great on there
