LAS VEGAS XJ GROUP-----> 1st ROLL CALL.
Jim I will hit you up when I get back in town. I should be getting back on the 7th or 8th of September and plan on picking up some 33s right away so they will be available when I do. the wheels are fine just the very outer lips has damage looks like curb rash pretty much. Ill let you know when I get home.
CF Veteran
Joined: Nov 2011
Posts: 1,314
Likes: 0
From: Las Vegas, NV - St. George, UT
Year: 1996
Model: Cherokee
Engine: 4.0
Originally Posted by sandfish88
I know, I cant wait to get out either. Havent felt dirt beneath my tires since MARCH!
I wanna see what open diffs, noisy pinion bearing, no SYE and crappy shocks can do lol.
Senior Member
Joined: Feb 2010
Posts: 681
Likes: 1
From: errrvre where
Year: 1996
Model: Cherokee
Engine: I6 4.0L HO, JBA headers, 99 intake, #703 injectors
Originally Posted by Driver X
We should plan a weekend run. Anyone down for one?
I wanna see what open diffs, noisy pinion bearing, no SYE and crappy shocks can do lol.
Thread Starter
Senior Member
Joined: May 2011
Posts: 841
Likes: 0
From: Las Vegas, Nevada
Engine: 4.0L
Jim I will hit you up when I get back in town. I should be getting back on the 7th or 8th of September and plan on picking up some 33s right away so they will be available when I do. the wheels are fine just the very outer lips has damage looks like curb rash pretty much. Ill let you know when I get home.
And they do way more than you would expect with open diffs. I miss the **** out of my red xj. It went everywhere I pointed it. It limped on a failing hub bearing for about a 1000 miles, including probably 50 miles of hard wheeling on it

I gotta get her registered after this slave goes in. ordered one for 60$ today. Finally just got my credit back from cRock auto.
Sounds fun . Badlands is relaxing for night runs. Not nerve racking like some trails.
Sean, can u make something like this?
http://i163.photobucket.com/albums/t...onepics021.jpg
Senior Member
Joined: Sep 2010
Posts: 617
Likes: 0
From: Las Vegas
Year: 1996
Model: Cherokee
Engine: 4.0
Hey guys how's it going? James what's up?
Hey I was wondering if any of you guys have the reamer and drill bits needed to install the JCR 1 ton steering??
If any of you guys do and can do this let me know im itching to get it installed.
Here is my setup all painted and looking nice

Here's the link
http://www.jcroffroad.com/mm5/mercha...uct_Code=1TNST
Hey I was wondering if any of you guys have the reamer and drill bits needed to install the JCR 1 ton steering??
If any of you guys do and can do this let me know im itching to get it installed.
Here is my setup all painted and looking nice


Here's the link
http://www.jcroffroad.com/mm5/mercha...uct_Code=1TNST
Senior Member
Joined: Mar 2011
Posts: 522
Likes: 0
From: Las Vegas
Year: 1992
Model: Cherokee
Engine: 4.oL H.O. 784 injectors, EV6 to EV1 connectors, APN header, Dynomax exhaust
Originally Posted by sandfish88
CF Veteran
Joined: Nov 2011
Posts: 1,314
Likes: 0
From: Las Vegas, NV - St. George, UT
Year: 1996
Model: Cherokee
Engine: 4.0
In for a night run. Don't care where. I got rock lights and cheap fogs on the bumper to light up the dirt lol.
Also got the CB and antenna installed, still need to tune it if anyone has a SWR meter.
Also got the CB and antenna installed, still need to tune it if anyone has a SWR meter.
Senior Member
Joined: Mar 2011
Posts: 522
Likes: 0
From: Las Vegas
Year: 1992
Model: Cherokee
Engine: 4.oL H.O. 784 injectors, EV6 to EV1 connectors, APN header, Dynomax exhaust
Originally Posted by Photojared
Nice, I like those wheels. I'd really like to get some 33s, going to regear at the same time though
Thread Starter
Senior Member
Joined: May 2011
Posts: 841
Likes: 0
From: Las Vegas, Nevada
Engine: 4.0L
Hey guys how's it going? James what's up?
Hey I was wondering if any of you guys have the reamer and drill bits needed to install the JCR 1 ton steering??
If any of you guys do and can do this let me know im itching to get it installed.
Here is my setup all painted and looking nice

Here's the link
http://www.jcroffroad.com/mm5/mercha...uct_Code=1TNST
Hey I was wondering if any of you guys have the reamer and drill bits needed to install the JCR 1 ton steering??
If any of you guys do and can do this let me know im itching to get it installed.
Here is my setup all painted and looking nice


Here's the link
http://www.jcroffroad.com/mm5/mercha...uct_Code=1TNST
Awesome.
So it was off by a half inch or something? Most 33s are like a 32.75" right?
Originally Posted by sandfish88
Whats goin on man? Long time no talk! You still got the lights I sold ya? I need some now! And yes I got the stuff to get that steering kit on there.
Jean lake? Henderson?
What brand cb?
Awesome.
Thos look like mine but theyre black!
agreed.
So it was off by a half inch or something? Most 33s are like a 32.75" right?


