Gotta drop my lift 3 inches or get the 300 dollar extension?
hmmm droppin it, but i need the tools.......hit me back with a pm if ya wanna help a fellow jeeper out THANKS

 

Uuuhhh wut? I'm not a mind reader and don't know if anyone on here is.. Wut are you trying to do? Details?

 

ive got tools... do you have a sye? if so we can get you a longer drive shaft at the jy or we can take the lift out i got plenty of tools to do so

 

just tryin the drop my lift 3 inches, that means taking out the spacers up front on the coil, and the blocks in the rear under the leafs, its really simple and quite fun i just need the tools, if i dont do this i have to buy some extension for my driveshaft since im over 7 inches of lift which is like 300 dollars brand new. so i need help and tools thats why i made the post. lol

 

where are you located at?

 

A transfer case drop might also solve your problem for a lot less than $300. I have about 8" of lift with stock driveshafts and a transfer case drop and I get very little vibrations. Of course I want to do new shafts and an SYE, but the tranfer case drop works for now.

 

i got away with a 1" t-case drop on my 88 with 6.5" lift but when i transferred it to a 94 jeep cherokee, i couldn't even go 3 feet forward without binding the driveshaft. it all matters on the jeep, they have minds of their own. i have plenty to tools and would be willing to help, easy stuff, where you located at?

 

thanks for the help guys ill look into the T case extension online and try to find a good deal.
Im close to portland i think about 15 mins exactly.

 

just use a pice of 2x4 and cut/drill it. all good!