What did you do to your XJ today??
CF Veteran
Joined: Jan 2011
Posts: 3,228
Likes: 1
From: BELLINGHAM W.A.
Year: 1993
Model: Cherokee
Engine: 4.0
I started it up and filled the flat tire and started looking at a cut and fold write up, anyone want to help me do this mod? https://www.cherokeeforum.com/f58/re...rite-up-94546/
CF Veteran
Joined: Jan 2011
Posts: 3,228
Likes: 1
From: BELLINGHAM W.A.
Year: 1993
Model: Cherokee
Engine: 4.0
Well i ended up hammering over my pinch welds something i should have done a long time ago
not exactly pretty but its done finally
the driverside didn't really show in the picture i took
and i used my hilift to flex my jeep so i had alittle more room to hammer
not exactly pretty but its done finally
the driverside didn't really show in the picture i took
and i used my hilift to flex my jeep so i had alittle more room to hammer
Banned
Joined: Sep 2011
Posts: 138
Likes: 0
From: Sisters, OR
Year: 1989
Model: Cherokee
Engine: 4.0L stock
Removed front bumper to get it powder coated. Pulled plastic trim pieces off the sides of the jeep(still need to remove the adhesive tape) trimmed front fender flare a bit so it will hopefully look better with the bumper, relocated the horns so that they don't hang below the bumper, and learned that UCA bushing replacement won't be as easy as I was hoping. No parts store in town had bushings and was told by a couple just to get a new axle. Lol
CF Veteran
Joined: Aug 2012
Posts: 1,592
Likes: 0
From: oregon
Year: 1993
Model: Cherokee
Engine: 4.0 ho 99 intake ps pump 1" tb spacer 62mm bored tb eletric fans and more
Senior Member
Joined: Feb 2012
Posts: 620
Likes: 0
From: Arnold MO
Year: 2000
Model: Cherokee
Engine: 4.0
Took the front bumper off and added driving lights to the bumper, cut a space in the factory center switch panel to accommodate the new switch. Worked on getting all the bolts loosened up so that it is ready for the lift kit to go in next weekend.
Member
Joined: May 2012
Posts: 195
Likes: 0
From: Dayton, Wa
Year: 1996
Model: Cherokee
Engine: 4.0
Pretty sure they were being sarcastic. But it does sound like it can be a PITA job. I sprayed the bushings down with some Kroil oil so hopefully they will be easy to get out. Also soaked the the CA bolts down so that I can swap in my BDS CA to replace the RC Lowers and stock uppers.
CF Veteran
Joined: Mar 2011
Posts: 1,842
Likes: 0
From: Woodinville, Bothell and Marysville Washington
Year: 2000
Model: Cherokee
Engine: I6 4.0
Originally Posted by squirrelcrusher
Pretty sure they were being sarcastic. But it does sound like it can be a PITA job. I sprayed the bushings down with some Kroil oil so hopefully they will be easy to get out. Also soaked the the CA bolts down so that I can swap in my BDS CA to replace the RC Lowers and stock uppers.
Senior Member
Joined: Oct 2010
Posts: 659
Likes: 0
From: New Haven, CT
Year: 1995
Model: Cherokee
Engine: 4.0L
Originally Posted by stang65
Happy birthday. may it be full of fun.
my last birthday wheelin trip i got a 4coil 8500lbs ramsy winch
my last birthday wheelin trip i got a 4coil 8500lbs ramsy winch
