And what do you think about the tcase? Im getting 2 inch shackles as well thank you for all the advice

 

See above, I edited my Post.

 

Oh alright i think i may just do a 2 inch coil space i just wanna fit 31s i already cut my finders

 

With cut fenders, 2 inches will give you plenty of room for 31s, and you can keep your stock shocks.

 

Well they need replacing anyways but will the trac bar be alright and the break lines (they look long) and tcase sorry to ask so much just by far you've helped me out the most on this site

 

Since you have a pre 97 xj you most likel will not need to do anything with the t case at 2 inches of lift. The track bar will work for 2 inches, but the stock one has a weak tie rod end on it, and your axle wot be dead center. I'd get an adjustable double shear track bar. Google double shear teak bar, it will tell you the difference. I'll dig up a picture of where to relocate your brake lines to, give me a minute.

 

Alright thank you

 

Here's the pic.

Just unbolt the brake line, it's a torx bolt I can't remember what size, carefully straighten the metal line with your hands. Be extremely careful not to kink it. Use a self tapping screw to mount it where you see it in this pic. This setup is good to about 3.5 inches of lift.
where are you from?

 

My god that picture is awful lol but does show it! Thanks for that haha

 

my pic is blurry as hell, and the screw wasn't in. yours is much better.

 

Im from hesperia California looks good thanks for the picture

 

I'll take an even better one tomorrow haha

 

I stole the pic from this guy.

 

I need to re take a lot of pics that I took at night the pics in by build suck.

 

Their fine your jeeps bad *** by the way. So i believe those 2 random silver things that came with my lift are tcase drop bolts.because i seen another kit with 4 for the drop same ones but why would it only come with 2