So I have been still wrenching my jeep and I have an idea that i want to do but I'd like to see if any one else has any advice because I'm not great with electrical. So the donor jeep I used had stock fog lamps on the brush guard. I have the headlight harness from the donor (see me holding harness plugs in pic) and the switch from the donor dash (also in pic) I am going to try and wire these up with that stock switch. I would like to use the factory plugs as for easy removal. If anyone has done this I'd love some advice. Thanks ahead of time

 

So odd kinda related to fog lights question. I just rewired my headlights due to corrosion under the air box, I ended up with four extra wires on the chassis side and can't seem too find where they go. I have a sneaky suspicion that they are for fog lights that were not equipped in my cherokee but since I can't seem too find a wire diagram for the chassis to headlight harness clip I'm unsure as to if I wired this correctly even tho everything works properly I'm ocd about extra loose wires.so my question is are the brown w white, white w green, light blue, and red w orange wires for fog lights that are not there I seem to be getting power from both red orange wires

 

Wiring might all ready be there...