wires by kick panel
#1
CF Veteran
Thread Starter
Join Date: Sep 2010
Location: Milwaukee, WI
Posts: 21,168
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1987
Engine: Check
wires by kick panel
I am in the process of making a custom dash.
While cleaning up wiring I found wires running through the kick panel just above the door speaker wires.
Anyone know what they are? I haven't looked very closely...
While cleaning up wiring I found wires running through the kick panel just above the door speaker wires.
Anyone know what they are? I haven't looked very closely...
#2
CF Veteran
Thread Starter
Join Date: Sep 2010
Location: Milwaukee, WI
Posts: 21,168
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1987
Engine: Check
Pics...
The black and white pair just above the door speaker wires...
Both driver and passenger side has them! And from the interior they run just above the door speakers, but not through both sheets of metal. They actually run up into the body towards the engine bay.
The black and white pair just above the door speaker wires...
Both driver and passenger side has them! And from the interior they run just above the door speakers, but not through both sheets of metal. They actually run up into the body towards the engine bay.
Trending Topics
#9
CF Veteran
Join Date: Nov 2008
Posts: 2,003
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1987
Model: Cherokee
Engine: 4.0
door ajar switch wiring.
they plug into the little switch that should be screwed into the front of the door frame. open door = interior lights turn on, and annoying buzzer as well.
they plug into the little switch that should be screwed into the front of the door frame. open door = interior lights turn on, and annoying buzzer as well.
#12
CF Veteran
Thread Starter
Join Date: Sep 2010
Location: Milwaukee, WI
Posts: 21,168
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1987
Engine: Check
I guess cut wasn't the right word.
But they are getting tucked into the harness. Not needed, just in the way.
My dash is 100% out as is, so I want to clean and simplify everything possible before putting in the sheetmetal dash.
But they are getting tucked into the harness. Not needed, just in the way.
My dash is 100% out as is, so I want to clean and simplify everything possible before putting in the sheetmetal dash.