Trying to get all the bugs out of the 92. All 4 windows only go down and up from drivers door. Also the auto locks dont work. One thing i noticed too was that when i push the passenger rear window up the dome light comes on which dint work right. Also the radio light shuts off when head lights are on which i figured some of this was from the headlight switch cuz.my dash lights dont work lol sounds.like a mess huh

 

After doing some work in the drivers side door on my 98 I had the same problem. Turns out I did not snap one of the connectors all the way and it worked itself out. I have not been inside a door of your year with power anything so I'm not sure if the wiring is set up the same way or not(on two separate connectors). Wish I could be more help but that's all I've got.

 

im having a similar issue. all of the windows roll down with the driver controls. but they dont work with the ones on the passenger front or rear. all the locks function. and i can lock all the doors with the front passenger auto lock. but I cant roll down any of the windows unless i do it on the driver controls. any suggestions? i am driving a 2000 XJ sport

 

Im having same issue with power windows not working except via the drivers panel. Let me know if you figure it out !

 

I gave up and hope it goes up in a firey ball of awesomeness

 

I just checked fuses and there was a fuse in spot #18 when there shouldn't be. Pulled out and windows now work !!

 

It's the window lock switch, they're known for problems.

http://www.jeepforum.com/forum/f11/f...ummies-459934/

 

I've got the same problem with my 2000

 

That link above is a quick way to bypass and avoid actually taking the switch housing and switch apart to clean the contacts.

 

ya seen that before.
thats a good write up.

one thing i noticed with mine is that the wiring harness going into the door is stretched and had frayed wires.
it was fun, u could roll the window down and the front speakers turned off along with the blower motor died down a few amps. when it went up all worked well.

also if i press and hold the unlock button the dome light buzzes and turns on. lol

 

Thanks Mike. I don't think I'll be trying this fix,but at least I can print this out to get her done.

 

We can take care of it when we do that head

 

On the later model XJs a common problem is the window lock switch. Over time and repeated use the solder joints break. If you can solder its pretty simple to open it up and resolder those joints.

 

i just so happen to solder of a living. so I'll see if I can get into it this weekend and play with it. My friends got a 96 GC we have to do some work on too.

 

Here's the write up for going into the switch to clean contacts/solder joints

https://www.cherokeeforum.com/f51/ho...-switch-86322/