motoxpete

I've going crazy trying to get the cork's out of my xj before i install this 4.5 lift in my livingroom. I had a bad studder at cruizing speed so decided to do spark plugs, wires, rotor, cap, fuel filter, and air filter. Anyway when i went to replace the air filter there was alot of oil on it. I did have a valve cover leak that i fixed 2 week's ago.... could that be where it came from?? If not any info would be great guy's
Thank's
Pete

caged

it's blow by. google it. there's alot of info on this.

basically, it's caused by a clogged ccv vent line. but causes do vary.

crashzx6r

heres a good link to help explain your problem...i listened to it and now i have no more oil going to my air filter

http://jeep.off-road.com/jeep/articl....jsp?id=257985

gabe

Yah it's comes from the hard plastic hose that runs from the front of the valve cover to the left side of the air box if looking at it from the front of the of the jeep.You can take that line off all together,and cork the air box end.Then buy one of those mini cone filter's from the zone to put on the valve cover side.That will take care of it,I did the same thing after I put my cold air intake on.

a1racer

you could but you wont pass smog that way

99XJDad

Not everyone has to worry about smog. I think I'm going to do this mod to prevent any blow-by though.

Metmknice

There was actually a write-up on here, about how someone isntalled a oil catch filter apparatus in line from the valve cover to the air box, keeps oil out of the air box and keeps your system legal.

lsc91

I'd like to see that article.If you can find it send me the link please.