What temp?
#5
CF Veteran
Thread Starter
Join Date: Jan 2010
Location: Indianola IOWA
Posts: 2,059
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee
Engine: 4.0
i no longer have a mechanical fan and am tring to get the fans to kick on at the temperaturs i want. getting the new fan dialed in but now wanting to maybe change at which point the stock electric fan kicks on
#6
I put a variable resitor inline with the stock temp sensor to fine tune. My sensor what on the high end of the "acceptable" range, meaning it was reading higher than what the actual temp was. 50 to 70 ohm should translate to the gauge/PCM reading roughly 7-10º lower at operating temp. Enough to bump it down a little, but not enough to effect anything else.
#7
CF Veteran
Thread Starter
Join Date: Jan 2010
Location: Indianola IOWA
Posts: 2,059
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee
Engine: 4.0
that is good info. i a pretty close to just running it off of a different thermal switch. i got a vw one that has two outputs, one at 195 and one at 210. havent decided yet though
Thread
Thread Starter
Forum
Replies
Last Post
sluger17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
07-08-2023 07:08 AM
pmd1995
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
07-29-2017 07:58 AM
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
07-20-2016 04:38 PM
LittleRed94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-06-2015 08:09 PM
Joshuapn
Other Vehicles. Other Jeep models & cars and trucks of other makes
1
09-25-2015 08:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)