what is going on with my sway bar links!!???
#1
Junior Member
Thread Starter
Join Date: Nov 2008
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0
what is going on with my sway bar links!!???
Ok, I have an 87 XJ 4.0L,auto with a 3" lift, spacer front, blocks rear.( I know to much metal, not enough spring!! lol) I noticed my front sway bar links are almost touching my springs!! I noticed they were close when I got it, but since I put the lift on, they are extremely close!! And one is closer than the other!? Is my sway bar bent?? , I know the links could possibly be bent, but has anyone encountered this?? This has only has to last till I get the money to put on a 5.5" full lift kit!! Any suggestions??
#4
Member
Join Date: Oct 2008
Location: New Hampshire
Posts: 181
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0
Well, I have the same problem, and what I have been reading about this problem, is that you have to either extend the sway bar links, or buy disco's for that size lift. When you lift the jeep the sway bar lifts with it, but the links stay in the same, so it actually puts your sway bar at the wrong angle. I'm also very tired right now, so I hope this makes since. I'm going to buy some disco's, and new bushings for mine. I think that I saw this on: http://www.go.jeep-xj.info/ Good Luck
J
J
Thread
Thread Starter
Forum
Replies
Last Post
mmsobyak
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-29-2015 06:46 AM
terzdesign
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-22-2015 10:39 PM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
09-19-2015 07:55 PM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-13-2015 02:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)