dans01classic

Okay i have torn my tock exhuast components to bits wheelin around and what not. Not to mention what was already bad. So now I have terrible exhaust leaks coming from everywhere. I need to replace the muffler, down pipe and a few other things under there so rather than going stock i figured id put something that might sound decent. I dont want anything obnoctious. I dont want it to be loud. just a nice deep sound. Any advice on what I should go with. What do you guys have?

96_xj

here is what i run:
https://www.cherokeeforum.com/f59/gl...k-video-49580/

96_xj

When you upgrade it, Get a 2.25 re made down pipe(no factory kink) then go into 2.5" into the cat, then 2.5" muffler of choice, Then 2.5" tail pipe.

There is a vender on here that sells Cat's for cheap, really nice units. There is also a vender on here that sells Mandrel bent Tail pipes. Nice quality too.

dans01classic

so thats just a glasspack and everything else is stock. sounds pretty good. thanks.

96_xj

Specs:
stock re-welded header
stock down tube
magna flow Hi-Flow 2.5" cat
2.5" connector piece with a bung
2.5" glass pack
2.5" mandrel bent tail pipe
2 years old now

96_xj

look into these:

https://www.cherokeeforum.com/f10/our...nverter-45340/


https://www.cherokeeforum.com/f10/new...st-kits-45131/