werid noise when ideling
#1
Seasoned Member
Thread Starter
Join Date: Jul 2009
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 inline 6
werid noise when ideling
this happens very rarely like once in a blue moon, when i am ideling at a stop light i hear a knock, kncok, knock sound coming from where the transmission is i know for sure its not the engine b/c the engine has 13,000 miles on it, its new. I was told it might be a loose touque converter which is probably what it is, and ideas though??? I am not really worried about it just that its a a strange noises to hear from a jeep with a new engine and a tranny with 114,000 miles on it. thanks for the help
#3
Seasoned Member
Join Date: Oct 2008
Location: North Carolina
Posts: 255
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0 Liter L6
would definitely look at the torque converter bolts, especially if they are already loose... I would say that could be a big concern rather quickly
#4
Seasoned Member
Thread Starter
Join Date: Jul 2009
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 inline 6
i dont remember a rattling noise, however how hard is it to get access to the torque converter bolts do i have to remove the tranny?, also could it be a bent flywheel
#5
CF Veteran
Join Date: Jul 2009
Location: Chico,ca
Posts: 2,158
Likes: 0
Received 10 Likes
on
9 Posts
Year: 89
Model: Cherokee
Engine: 4.0
No,it is simple just remove your inspection cover,dust cover(front bottom of trany) and you will be able to get to them,you will need to have some help to rotate the engine to get to all of them.
Just so you know on an automatic you cannot remove the trany unless the torgue converter bolts are off. If it was bent I think you would here it all the time,there is very little clearance around the flexplate.
Just so you know on an automatic you cannot remove the trany unless the torgue converter bolts are off. If it was bent I think you would here it all the time,there is very little clearance around the flexplate.
Last edited by Abovetimberline; 08-19-2009 at 03:23 PM.
#6
Newbie
Join Date: Jul 2009
Location: Byrdstown Tennessee
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Mine would rattle once in a while while stopped in gear.......I finally found it to be the linkage to my NP242 (once it got more consistent).
Trending Topics
#8
Junior Member
Join Date: Jun 2009
Location: Houston, TX
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
I have a knock/rattle noise that is what you described except mine is pretty consistent. I am almost positive it is my shift linkage to my transfer case. It's pretty rusty down there and probably could be greased and tightened.
#9
Seasoned Member
Thread Starter
Join Date: Jul 2009
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 inline 6
hhah you guys aren't gonna beliveve this but i use the ash tray as a coin holder since im not a smoker and today i realized the coins may be makin the noise and when i removed them i started the car and guess what no noise. but i only drove it like 1 mile so i'll give it some more time then i'll find out.
Thread
Thread Starter
Forum
Replies
Last Post
Austindude2015
Cherokee Chat
17
12-28-2020 05:12 PM
LittleRed94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-06-2015 08:09 PM
Freakn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
52
10-04-2015 06:34 AM
Lightning_19k
Modified XJ Cherokee Tech
14
10-03-2015 09:52 PM
redrooster
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
10-02-2015 12:35 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)