So what does it take? Can i just pull out the 2 piece axle and put in a 1 piece? I'm having trouble finding a write up on the matter. I've got the d30 all disassembled and ready for new axles, I just want to know which way to go next.

 

I've always be under the impression all you need to do is swap the shafts but I could be wrong

 

yup, just make sure the seals are good in the "cad" section and throw in some new 1 piece shafts

 

i was had the understanding that you need a different oil seal inside the housing to run the one piece shaft in the disco axle housing

https://www.cherokeeforum.com/f2/swi...uestions-8711/

 

You have to pull the carrier to install the seal. Since the disco seal won't work on a 1 piece shaft.

 

heres the best write up ive found its the same as doing it to ours
http://www.stu-offroad.com/axle/yjd3...jconvert-1.htm