Useless display on the right of the instrument panel?

Subscribe
Feb 10, 2010 | 06:05 AM
  #1  
What is this used for? Is it just for looks, to mirror the left or what?



Thanks!,
AEGuy87
Reply 0
Feb 10, 2010 | 06:49 AM
  #2  
I'm not 100% but I think it is where the cruise control buttons were located on models that were equipped. That's my best guess.
Reply 0
Feb 10, 2010 | 07:17 AM
  #3  
No, the cruise control buttons are on the lever behind the steering wheel. That is the place where the digital clock goes when equipped.
Reply 0
Feb 10, 2010 | 07:25 AM
  #4  
The clock went there.

Also the system sentinel went there on the very early models.
Reply 0
Feb 10, 2010 | 09:43 AM
  #5  
the clock... mine didnt have one but got it from my 85 limited wagoneer... wires were different and mine didnt have power so i just hard wired it into the radio...

 

Reply 0
Feb 10, 2010 | 10:22 AM
  #6  
I was going to ask same question.. .what eles went there.. what options...
Reply 0
Feb 10, 2010 | 10:30 AM
  #7  
the clock takes up the whole back side of this thing... in fact the plugs down at the bottom...
Reply 0
Feb 10, 2010 | 12:17 PM
  #8  
yes its for the clock but the bottom portion was for a alarm and panic button these were fitted as a option hope this helps
Reply 0
Feb 10, 2010 | 12:19 PM
  #9  
would still like to see a pic of one with all the options
Reply 0
Feb 10, 2010 | 02:01 PM
  #10  
without the clock, it serves as a great location to place your switches for lights, air compressor, or any other confangled electrical device you want to turn on or off.
Reply 0
Feb 10, 2010 | 02:38 PM
  #11  
Quote: without the clock, it serves as a great location to place your switches for lights, air compressor, or any other confangled electrical device you want to turn on or off.

x2 I put my transmission temp gauge there.

oh wait I replace the cig lighter with the gauge.
Reply 0
Feb 10, 2010 | 02:40 PM
  #12  
They put that there so when you add stuf to your jeep you would have a good spot to mount the switches.
Reply 0
Feb 10, 2010 | 03:02 PM
  #13  
That area is pretty shallow, the black plastic behind it is the ducting for the HVAC.

I found this out when i installed my interior winch controls.


Reply 0
Feb 10, 2010 | 04:06 PM
  #14  
Reply 0
Feb 10, 2010 | 04:08 PM
  #15  
Quote:
wow thats cool
Reply 0