UGLY
Thread Starter
Junior Member
Joined: May 2011
Posts: 62
Likes: 0
From: Indianapolis
Year: 2001
Model: Cherokee
Engine: 4.0
Should I paint it black?...paint suggestions?...I've also heard of folks using bedliner...or should I just pull the trim pieces off...Thoughts and suggestions??
Thanks Joe
Thanks Joe
Junior Member
Joined: Sep 2011
Posts: 32
Likes: 0
From: Columbus GA
Year: 1999
Model: Cherokee
Engine: 4.0 i6
yeah take them off! looks a lot cleaner. scrape double sided tape off with fingernail or something that wont scratch the paint then a washcloth with some gas to get the goop off.
I took mine off a few months ago. It looks much better than that old faded plastic. I bedlined my bumper caps as well, because they were faded as well.
I tried painting my with Krylon fusion paint and it started chipping after a few months, even with primor. Bedliner is the way to go, it's just a lot of prep work. Its kinda hard to see in the pic but paint isn't your best bet.
I tried painting my with Krylon fusion paint and it started chipping after a few months, even with primor. Bedliner is the way to go, it's just a lot of prep work. Its kinda hard to see in the pic but paint isn't your best bet.
Last edited by jmm0122; Oct 2, 2011 at 08:51 PM.
Trending Topics
Senior Member
Joined: Dec 2010
Posts: 982
Likes: 0
From: seacoast, new hampshire
Year: 2000
Model: Cherokee
Engine: 4.0
Originally Posted by mnwildfan2k
What happened? Ha! I can just about imagine... Like a paper cut, sneaks up on ya, and bite ya in the @$$!!
CF Veteran
Joined: Jun 2010
Posts: 2,117
Likes: 3
From: Ohio
Year: 1998
Model: Cherokee
Engine: 4.0 stock
Just wanted to add... some people say that using a hair dryer will bring the plastic back. Others paint them with good results. Just make sure to take off the oxidation before paint.
IMHO if you park in crowded parking lots I would leave them on.
IMHO if you park in crowded parking lots I would leave them on.
CF Veteran
Joined: Nov 2008
Posts: 7,874
Likes: 100
From: Northern Ontario, Canada
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
if you take them off, use goo gone or goof off to remove the sticky crap left behind.
if you paint them, use krylon for plastic. i use flat or semi-gloss.
if you paint them, use krylon for plastic. i use flat or semi-gloss.
As for color... Black is my preference.. I'd say pull as much plastic off as you want, no fender flares and end caps is legit, IMHO.. From here, either paint it all and then bed liner up as far as you want- some do just running board area, others up to the window line. It's preference. If you want to save paint, then only paint down to bed liner. Good luck.
Also consider doing bed liner on floor under feet, like the outside, this takes some work, but the results are usually worth it.
Also consider doing bed liner on floor under feet, like the outside, this takes some work, but the results are usually worth it.
Thread
Thread Starter
Forum
Replies
Last Post
stimp774
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
28
Oct 1, 2015 09:00 PM
d00med
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Sep 11, 2015 03:32 PM
taythegibs
Other Vehicles. Other Jeep models & cars and trucks of other makes
32
Mar 21, 2011 10:25 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



