Any body know the size of the u bolts for the rear leaf spring on the D 35?

I think the bend is 3 inches, but I have to order a new set for my pack and dont have the jeep with me.

Do you know the length and diameter as well??

Chuck

 

pep boys sell block kit with u bolts that fit and are real long cut off what you dont need there only 30 or 40 bucks with washers and nuts the sell the block for 20 bucks and make some money back i think auto zone sell them also

 

autozone

$15.00

 

I may be mistaken, but I believe the D35 has a 2 7/8" bend. The 3" bend is for the 8.25.

 

+1

 

I have a set of these somewhere- they are Pro-Comp and came with my RE lift (3.5" kit)

They are smaller than 3" because that's what I needed for my 8.25 and they didnt' fit. Seems I was sent the wrong ones.

PM me with an offer and I'll dig them out tomorrow.

 

I think this is what he's looking for:
http://www.4wheelparts.com/Lift-Kits...&t_pn=EXP50050

And by the looks you would need two sets of those to do both leaf springs.

 

I ended up calling a local spring shop and he had them for me, less than $30 for all 4

According to his computer they should have a 2.75 inch bend (D35) with a 1/2 inch diameter rod. I think he said 6" long, I ended up getting 8" because I am doing a bastard pack, but I am sure I can cut em down to size

thanks for the info

Chuck