u-bolt size?

Subscribe
Nov 15, 2009 | 08:05 PM
  #1  
98 2 door cherokee sport 5 spd what kind of axel do i have? i need the u-bolt size for it
Reply 0
Nov 15, 2009 | 08:28 PM
  #2  
could be d35 (2 3/4" ubolts) or a chrysler 8.25 (3" ubolts). i'm sure theres a link around here for axle identification.
Reply 0
Nov 15, 2009 | 08:32 PM
  #3  
well the problem is....its at my buddys house and i need the size cauz im getting a RC lift but he wont get under it to look so now im stuck tryin to figure it out with no luck..
Reply 0
Nov 15, 2009 | 08:33 PM
  #4  
easy, do you have ABS?
Reply 0
Nov 15, 2009 | 08:38 PM
  #5  
haha ?
Reply 0
Nov 15, 2009 | 08:38 PM
  #6  
The ABS question only gives a definite answer if he has it. With ABS it is a Dana 35 axle, without ABS it could be either the Dana 35 or the Chrysler 8.25. So if you do not have ABS, there is absolutely no way for us to tell you what kind of axle you have without a pic.
Reply 0
Nov 15, 2009 | 08:39 PM
  #7  
its got drums in the back and dicos in the front
Reply 0
Nov 15, 2009 | 08:39 PM
  #8  
Only way to tell is to figure out which rear end you have. I have found that Chrysler is more common. Absent knowing for sure, if you get Chrysler and need the Dana ones, I have a set that came with my RC kit I would trade. It would be through the mail, but I'd be willing.

Only modified Cherokee's have any other brake set up. there is no way to know without looking, I believe Dana has a bolt in diff plug whereas Chrysler has a rubber plug
Reply 0
Nov 15, 2009 | 08:40 PM
  #9  
Quote: its got drums in the back and dicos in the front

That does not help. All XJs are front disc, rear drum.
Reply 0
Nov 15, 2009 | 08:40 PM
  #10  
its got drums in the back and dicos in the front idk if that helps any
Reply 0
Nov 15, 2009 | 08:41 PM
  #11  
darn.....any other way?
Reply 0
Nov 15, 2009 | 08:41 PM
  #12  
haha any special buttons in the car for it?
Reply 0
Nov 15, 2009 | 08:43 PM
  #13  
Only way to know is to check the diff, does the plug bolt in or is it rubber or to measure, Dana has 2.62 axle housing diameter, Chrysler has 3 inch.
Reply 0
Nov 15, 2009 | 08:44 PM
  #14  
what about the t case mines a 242
Reply 0
Nov 15, 2009 | 08:45 PM
  #15  
my RC came with ubolts for both sizes so you should be all set.
Reply 0