Transfer Case breather hose location?
#1
Newbie
Thread Starter
Join Date: Nov 2011
Location: Arvada, Colorado
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Transfer Case breather hose location?
Hi folks, just finishing up my AW4 and Transfer Case installation on my 99 cherokee automatic 4wd. One final question, I cannot recall where the transfer case breather hose exits. There is a small bracket with a hole that goes to a bolt somewhere. Can anyone remind me where that bolts to? Do you have a pic?
Thanks,
Andy
Thanks,
Andy
#3
CF Veteran
Join Date: Aug 2010
Location: Canton, MI
Posts: 8,357
Likes: 0
Received 82 Likes
on
67 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
As i Recll the TC vent valve bracket is attached to the trans dipstick tube mount bracket hole in the bellhousing. Can't recall because I trashed the bracket and extended the TC vent tube up to around the wiring harness against the firewall. Same thing with the AW4 vent tube.
I used a 5/16x5/16" brass barb couler and some 5/16" ID vacuum tube to extend the TC tube. Used a 1/4x1/4" brass barb coupler and 1/4" ID vacuum tube for the AW$ vent tube.
I used a 5/16x5/16" brass barb couler and some 5/16" ID vacuum tube to extend the TC tube. Used a 1/4x1/4" brass barb coupler and 1/4" ID vacuum tube for the AW$ vent tube.
The following users liked this post:
Smiley_Jeep (01-03-2022)
#4
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,867
Received 1,524 Likes
on
1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
As i Recll the TC vent valve bracket is attached to the trans dipstick tube mount bracket hole in the bellhousing. Can't recall because I trashed the bracket and extended the TC vent tube up to around the wiring harness against the firewall. Same thing with the AW4 vent tube.
I used a 5/16x5/16" brass barb couler and some 5/16" ID vacuum tube to extend the TC tube. Used a 1/4x1/4" brass barb coupler and 1/4" ID vacuum tube for the AW$ vent tube.
I used a 5/16x5/16" brass barb couler and some 5/16" ID vacuum tube to extend the TC tube. Used a 1/4x1/4" brass barb coupler and 1/4" ID vacuum tube for the AW$ vent tube.
The following users liked this post:
318SixPack (11-05-2019)
#7
Front Diff Vent fittiing
This is what the relocation looks like. The AW4 vent was retained and the original POS TC vent was replaced by a front differential vent fitting.
Attachment 322531
Attachment 322531
The following users liked this post:
318SixPack (11-05-2019)
Trending Topics
#8
CF Veteran
Join Date: Oct 2015
Posts: 7,355
Likes: 0
Received 1,530 Likes
on
1,173 Posts
Year: 2000
Model: Cherokee (XJ)
https://www.rockauto.com/en/parts/mo...ase+vent,14361
I just get mine from the dealership though.
The following users liked this post:
318SixPack (11-05-2019)
Thread
Thread Starter
Forum
Replies
Last Post
eepjeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-06-2020 03:19 PM
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-07-2015 08:08 PM
Vegas101
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
09-04-2015 11:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)