any body have any tips on it, it looks like a super tight space and im 6'6'' and 250 lbs so i got some decent sized hands so its gonna be hard reaching in there. so any advice would be appreciated! thanks in advanced

 

A 12 pack and a skinny redneck woman.

 

Just kidding. Support the trans with a floor jack and a block of wood, unbolt the crossmember and left it down a little. That may give a little needed space.

 

when I did mine I found it a lot easier from underneath with 18 inches of extension and a wobble ratchet.

 

I never wanna do a cps ever again, im still not done cause the one that advanced sold me the bracket was too small so now im gonna fab up a peice of sheet metal to hold it in there, and i think that the bolt on the higher side of the bell housing is stripped. im gettin sick of my heep. i cant wait till i deploy and get a new heep and can drop a 305 in the one i got now.

 

EXACTLY how I did mine...Tj

 

man i did that but still it sucked so bad, i couldnt get either of the bolts to thread all the way so im just hoping that they dont back out on me.