on another subject i need tie rod ends and the adjsuting arm, i think i have one of the right part and the right adjusting sleve, but, i submit this photo and pose a question...


http://www.4x4xplor.com/images/align...lignment01.jpg



to the left the tie rod end that fits in to the long tie rod end.... what should i be looking for..what i got at orielly's was two of the same thing almost.. ... any help appreciated.. thanks in advance

 

I'm not quite sure what you're looking for here, didn't understand your post too well.

Though if you're looking to replace your steering and on stock or fairly small rubbers why not go to a local junkyard with a pickle fork and pull a V8 Grand Cherokee Tierod, and a stock XJ draglink and call it a day?

 

I just did this. Get an alignment after it is done however, the passenger outer tie rod end is REALLY LONG. It attaches to the steering stabilizer as well. The three other ones (Driver Outer and both Inner TREs) look very similiar. Also you will want to get a pickle fork for removal and both tie rod sleeves (0ne long sleeve and one very short one). While your at it might as well change your steering stabilizer as well. Hope that helps.