Terrible noise....
#1
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Orlando, FL
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Terrible noise....
ok so i just lifted my jeep with a rubicon express 3.5" lift kit and im not getting a very bad vibration when i accelerate and then as soon as i back off or slow down it makes a grinding type of noise, any help?
#3
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Orlando, FL
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
i replaced the u joint at the rear axle should i replace the one at the transfer case? and check my rear drive line?
thanks for your help
thanks for your help
#6
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Orlando, FL
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
i didn't instal shims under the leafs, and no i didn't do a t-case drop but i knew after that kind of vib i would have to, thanks guys.
where can i get some shims for the rear leafs?
where can i get some shims for the rear leafs?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Zerocyde
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
45
06-29-2022 05:51 PM
64dodge
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-30-2015 05:50 PM
ddurgin91
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
24
09-24-2015 09:48 AM
Harney315
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-23-2015 09:41 PM
SouthSeaPirate
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 11:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)