CF Veteran
Quote:
knowledgeable and experienced on this subject. I've had feedback on other forums telling me 6* shims are too large and shouldn't be used. Before I order 6* shims, do you have any reservations as to these shims being too large as far as safety issues, etc?
you will be OK with 6 deg shimsOriginally Posted by Cherokee33
mike37, I appreciate your advice to this point. You seem to be very knowledgeable and experienced on this subject. I've had feedback on other forums telling me 6* shims are too large and shouldn't be used. Before I order 6* shims, do you have any reservations as to these shims being too large as far as safety issues, etc?
CF Veteran
Quote:
up is OK as long as you are on the same angle as the motor and transOriginally Posted by CHIF8008
hey umm my rear axel is angled up.does it have to lay flat? is this a problem??
or if you have a SYE then you need to be at the same angle as the drive shaft